- Research article
- Open Access
Optimization and scale-up of α-amylase production by Aspergillus oryzae using solid-state fermentation of edible oil cakes
BMC Biotechnology volume 21, Article number: 33 (2021)
Amylases produced by fungi during solid-state fermentation are the most widely used commercial enzymes to meet the ever-increasing demands of the global enzyme market. The use of low-cost substrates to curtail the production cost and reuse solid wastes are seen as viable options for the commercial production of many enzymes. Applications of α-amylases in food, feed, and industrial sectors have increased over the years. Additionally, the demand for processed and ready-to-eat food has increased because of the rapid growth of food-processing industries in developing economies. These factors significantly contribute to the global enzyme market. It is estimated that by the end of 2024, the global α-amylase market would reach USD 320.1 million (Grand View Research Inc., 2016). We produced α-amylase using Aspergillus oryzae and low-cost substrates obtained from edible oil cake, such as groundnut oil cake (GOC), coconut oil cake (COC), sesame oil cake (SOC) by solid-state fermentation. We cultivated the fungus using these nutrient-rich substrates to produce the enzyme. The enzyme was extracted, partially purified, and tested for pH and temperature stability. The effect of pH, incubation period and temperature on α-amylase production using A. oryzae was optimized. Box–Behnken design (BBD) of response surface methodology (RSM) was used to optimize and determine the effects of all process parameters on α-amylase production. The overall cost economics of α-amylase production using a pilot-scale fermenter was also studied.
The substrate optimization for α-amylase production by the Box–Behnken design of RSM showed GOC as the most suitable substrate for A. oryzae, as evident from its maximum α-amylase production of 9868.12 U/gds. Further optimization of process parameters showed that the initial moisture content of 64%, pH of 4.5, incubation period of 108 h, and temperature of 32.5 °C are optimum conditions for α-amylase production. The production increased by 11.4% (10,994.74 U/gds) by up-scaling and using optimized conditions in a pilot-scale fermenter. The partially purified α-amylase exhibited maximum stability at a pH of 6.0 and a temperature of 55 °C. The overall cost economic studies showed that the partially purified α-amylase could be produced at the rate of Rs. 622/L.
The process parameters for enhanced α-amylase secretion were analyzed using 3D contour plots by RSM, which showed that contour lines were more oriented toward incubation temperature and pH, having a significant effect (p < 0.05) on the α-amylase activity. The optimized parameters were subsequently employed in a 600 L-pilot-scale fermenter for the α-amylase production. The substrates were rich in nutrients, and supplementation of nutrients was not required. Thus, we have suggested an economically viable process of α-amylase production using a pilot-scale fermenter.
Amylases, identified in the eighteenth century, are found in animals, plants, insects, and microorganisms . They belong to the family of GH13, with eight subfamilies known for hydrolyzing starch into glucose, maltose, and maltodextrins . Amylases include three groups of enzymes, namely, α-amylases, β-amylases, and glucoamylase. Among them, α-amylases have essential applications in a vast number of industrial processes such as food, fermentation, textile, paper, detergent, and pharmaceutical industries, owing to their potential thermal and pH stability .
Commercial production of α-amylases using microorganisms such as fungi and bacteria represents around 30% of the world market on enzymes . Fungi are more potential as α-amylase producers than bacteria. Furthermore, it is a suitable candidate for the industrial production of amylases because of the advantages of growth using low-cost renewable substrates, ease of enzyme extraction, broader stability to pH and temperature, and less requirement of a cofactor . Two fermentation methods, such as solid-state fermentation (SSF) and submerged fermentation (SmF), are being employed for α-amylase production. SSF is preferred over SmF, considering the amount of water requirement, enzyme yield, and energy utilization. Aspergillus is capable of secreting several extracellular enzymes, including amylases using renewable substrates. Its exploitation for industrial applications is favored because of its high enzyme secreting potential .
The primary cost for the production of industrial enzymes is high and is mainly required for of media development. To be economically potential, the use of low-cost carbon sources, and the addition of other substrates, elements, and cofactors to the media formulation, are considered essential for enhancing enzyme production . Valorization of low-cost substrates for the production of high-value products is gaining momentum as bio-based products fetch a price in the market with an added advantage of simultaneous reduction of waste generated . Oil cakes are the byproducts obtained after oil extraction and are commonly used in animal feed, especially for ruminants . Edible oil cakes have high nutritional value, especially protein content ranging from 15 to 50% . Moreover, rich fiber and polysaccharide content with less starch content makes the oil cakes suitable for valorization. Therefore, oil meals/oil cakes such as coconut oil cake, sesame oil cake, cottonseed cake, groundnut oil cake, palm kernel cake, and olive oil cake are considered as potential substrates for enzyme production.
Oil cakes are used as substrates for the production of glucoamylase using A. niger , phytase using Rhizopus oligosporus , and lipase using Candida rugose . SSF is primarily employed to produce enzymes using low-cost substrates at the industrial level. Industrial-scale fermentation is performed in tray reactors and drum-type fermenters. However, a simple, cost-effective fermenter is the need of the hour.
In addition, process parameter optimization to increase enzyme production using statistical approaches is a prerequisite for pilot or industrial production [11, 12]. Box–Behnken experimental design of response surface methodology (RSM) is an important statistical tool for screening or optimizing the process parameters. The production efficiency of α-amylase using fungi is mainly characterized by its morphology and metabolic potential . While using low-cost substrates and SSF, the high yield of amylase can be achieved by excessive fungal mycelium growth. Moreover, physico-chemical parameters such as pH, temperature, incubation period, carbon sources, and supplements, including inducers and surfactants, play a significant role in obtaining the maximum yield. Most studies indicate that combinational parameters influence the enzyme yield. In this study, the effects of pH, incubation period, and temperature on α-amylase production using A. oryzae were analyzed, and the process was optimized by BBD.
The α-amylases production using A. oryzae has been studied for SSF using spent brewing grains , combined substrates , rice husk and bran, wheat bran , peanut oil cakes , soybean husk, and flour mill . The optimization of process parameters by RSM using spent brewing grains  and rice bran  has been studied but not using groundnut, coconut, and sesame oil cakes. In the present study, we aimed to use GOC, COC and SOC for SSF to maximize the α-amylase production by A. oryzae and to optimize various process parameters by RSM. With these optimized SSF process conditions, pilot-scale production of α-amylase was also attempted.
C:N ratio of oil cakes
The total carbon and total nitrogen analysis of three oil cakes showed that the total carbon was the highest in GOC (24%), followed by COC (20%), and SOC (18%). The percentage of nitrogen in all the substrates was 1%.
Optimization of α-amylase production
The level and range of variables considered to optimize the process parameters for the maximum yield of α-amylase are shown in Table 1. Each replicated value of treatment was considered as a dependent variable or response, i.e., α-amylase activity (U/gds).
Response surface methodology for α-amylase production using GOC, COC, and SOC as substrates
In this model, GOC showed a pronounced effect on α-amylase production using A. oryzae. A positive correlation between all the process parameters and α-amylase production was observed and was the maximum for GOC as the substrate, followed by COC and SOC (Table 2). Multiple regression analysis was performed to analyze the data, and quadratic equations obtained for all the substrates are as follows:
where R1, R2, and R3 are the enzyme activities (U/gds) for GOC, COC, and SOC, respectively, A is the pH, B is the incubation temperature (°C), and C is the incubation period (h).
The efficiency of the designed model was tested, and Fisher’s statistical analysis was performed to determine the significant parameters. The results showed (Table 3) that the model design was significant (p < 0.05) with an F-value of 181.73 for GOC, 10.10 for COC, and 11.17 for SOC. The R2 values for GOC, COC, and SOC were 0.99, 0.92, and 0.89, respectively, indicating that the multiple regression coefficients were close to 1, resulting in a better correlation. The values of adjusted R2 (0.98, 0.83, and 0.77) and predicted R2 (0.93, 0.77, and 0.67) for GOC, COC, and SOC, respectively, confirmed the significance of the model. The p-value determines the significance between coefficients and also helps in estimating the interaction between the variables. A, B, C, A2, B2, C2, AB, and AC were significant variables for GOC; B, A2, B2, and C2 were significant variables for COC; and B, C, A2, B2, and C2 were significant variables for SOC. The variables having p-values greater than 0.10 were insignificant. This showed that pH, incubation temperature (°C), and incubation period (h) exert a strong effect on the α-amylase production using A. oryzae with GOC as a substrate.
Optimization of process parameters
The effect of substrates on the α-amylase activity of A. oryzae is shown in Fig. 1. GOC was found to be a suitable substrate for maximum enzyme production of 9868.12 U/gds, followed by 4031.12 U/gds using COC and 3068.15 U/gds using SOC. The effects of pH, incubation temperature, and incubation time on α-amylase activity using the three edible oil cakes are shown in Figs. 2, 3 and 4. The maximum amylase production was observed at 32.5 °C, pH 4.5, an incubation period of 108 h using all the three oil cakes (Figs. 2, 3 and 4). An increase in temperature to above 32.5 °C decreased enzyme production.
Interactions between the process parameters were also studied. While analyzing the effect of process parameters using a three-dimensional (3)-contour plot (Figs. 2, 3 and 4), it was found that temperature was a more significant parameter affecting the enzyme production than pH, as the central contour points were heading toward the temperature level for all the three substrates. In the interaction between pH and incubation period for α-amylase production, contour lines were more oriented toward the pH. Hence, we concluded that pH had a more significant effect on α-amylase production than the incubation period.
Comparison between pre- and post-optimization
A preliminary study was performed to estimate the amount of α-amylase produced using GOC, COC, and SOC under various process parameters such as pH, incubation temperature, and incubation period. The increase in α-amylase activity (6281.47 U/gds) was observed at pH 6, incubation temperature of 35 °C, and an incubation period of 145 h and a decrease in the activity (4657.93 U/gds) was observed at pH 3, an incubation temperature of 25 °C, and an incubation period of 72 h. Based on the preliminary study results, ranges of process parameters were optimized and used for the Box–Behnken design for post-optimization to achieve effective α-amylase production using the oil cakes. The post-optimization showed a maximum α-amylase production of 9868.12 U/gds with pH 4.5, a temperature of 32.5 °C, and an incubation period of 108 h. This combination of process parameters yielded higher α-amylase production than other combinations, resulting in the Box–Behnken design.
Production of α-amylase in a pilot-scale solid-state fermenter and cost economics
RSM-optimized parameters were employed to enhance the α-amylase production in a pilot-scale solid-state fermenter. Under the optimized parameters of a pH of 4.5, an incubation temperature of 32.5 °C, and an incubation period of 108 h, A. oryzae produced α-amylase to a tune of 10,994.74 U/gds using GOC. The overall cost of production was estimated with the total fixed cost and variable cost of Rs. 44,306/− and Rs. 4,22,819.32/−, respectively annually. The overall production cost for the production of α-amylase annually was estimated to be Rs. 622/L of amylase.
Partial purification and stability of α-amylase
Ammonium sulfate precipitation of α-amylase provided one-fold purification with an activity of 10,800 U/gds, and the partially purified protein was used for studying pH and temperature stability. The results of pH and thermal stability of α-amylase shown in Fig. 5 indicated that the maximum stability was found at pH 6, whereas pH below and above this value was detrimental. The maximum thermal stability was recorded at 55 °C for 10 min; a further increase in temperature resulted in a decrease in α-amylase activity.
In the present study, RSM-mediated optimization of process parameters for α-amylase production was performed using edible oil cakes with SSF. Previous studies on the optimization of α-amylase production have considered factors such as modifying nutritional parameters (C:N ratio, supplements, and other nutrients), physiological conditions (temperature, pH, inoculum load, and incubation time), the superiority of organisms (fungi and bacteria), and the method of fermentation (SSF and SmF) [1, 12]. One factor at a time (OFAT) optimization was predominantly used to optimize α-amylase production [12, 20,21,22,23,24,25]. Because of the tedious nature of OFAT, statistical optimization tools are preferred for optimization studies, especially for α-amylase production, since the past decade [24, 25]. Statistical tools provide an advantage of simultaneous optimization compared with OFAT with a range of design variables suited for each optimization program. In the present study, RSM optimization achieved an α-amylase production of 9868.12 U/gds using GOC. The use of low-cost substrates for α-amylase production is a common practice to reduce the cost. We found COC as one of the suitable substrate for α-amylase production using A. oryzae. Ramachandran et al.  followed the OFAT approach using COC and supplements and recorded a yield of 3388 U/gds of α-amylase .
Similarly, spent brewing waste was used as a cheap substrate, and Plackett–Burman based RSM was used for the optimization of the α-amylase production by A. oryzae NRRL 1808 (=ATCC 12892). Amylase production of 4519 U/gds has been reported to be achieved in 3 days under optimum conditions . Fusarium soloni was employed for the production of α-amylase using mango stone kernel. The α-amylase yield of 0.889 U/gds was achieved with 5% (w/v) substrate concentration at pH 4.0 and temperature of 30 °C in 9 days . A. terreus NCFT4269.10 was used for α-amylase production under both liquid static and solid substrate fermentation using pearl millet as a substrate. Pear millet substrate yielded a maximum amylase yield of 19.19 ± 0.9 U/gds by SSF. The increased yield was attributed to additional substrates added to pearl millet such as magnesium sulfate (1 mM), gibberellic acid (0.025% [w/v]), and vitamin E (30 mg/100 mL [w/v]). The optimized process conditions were pH of 7.0 and incubation temperature of 30 °C for 96 h . A. oryzae MTCC-8624 was used for α-amylase production using rice bran with SmF. The experimental parameters were optimized using a Box–Behnken design. The optimum conditions were found to be 16.89 U/mL at a pH of 4.7, the temperature of 36.5 °C, fermentation time of 66.6 h, inoculum concentration of 5.7%, and substrate concentration of 18.9% . The results are in accordance with our findings and confirmed our findings. After comparing the α-amylase yields of all the studies, irrespective of the method of optimization, we found that the yield obtained in the present study was higher. Reasons for the high yield can be the nature of the substrates and their nutritive values, the secretory potential of fungi, and the optimization conditions of RSM. Moreover, several studies had supplemented the substrate with either carbon source, nitrogen source, or other additives to improve the yield of α-amylase. However, no supplementations were incorporated in the present study. This encouraged and supported the RSM method of optimization for yielding a high amount of the enzyme, especially with A. oryzae using edible oil cakes. The parameters optimized in this study were employed for pilot-scale fermentation for the maximal production of α-amylase, and the results showed a 1% increased yield. Pilot-scale optimization is a prerequisite technique for the industrial production of enzymes. A GROWTEK bioreactor was designed to overcome the limitations of the tray-type solid state fermenter. In another study, A. oryzae was cultivated in SSF and attained a maximum yield of 12,899 U/gds of amylase at 30 °C after 66 h of incubation. The yield of SSF was further increased to 15,480 U/gds when supplemented with 0.1% Triton X-100 . However, in the present study, less increase in the α-amylase yield in a pilot-scale fermenter might be because of the absence of supplements. Partially purified α-amylase showed thermal and pH stability, which can potentially be used in the detergent industry and for the biodegradation of food waste . Many studies have been performed to demonstrate improved thermal and pH stability of enzymes having industrial applications [2, 30,31,32].
The α-amylase production using A. oryzae under SSF was performed to optimize parameters in the presence of different edible low-cost deoiled cakes as substrates by using RSM. The process parameters such as incubation temperature, pH, and incubation period had a significant effect (p < 0.05) on the α-amylase activity. Under the optimum process conditions, the maximum α-amylase activity of 9868.12 U/gds was attained when GOC was used as a substrate at a pH of 4.5, incubation temperature of 32.5 °C, and an incubation time of 108 h. The partially purified α-amylase exhibited the maximum stability at a pH of 6.0 and a temperature of 55 °C. The pilot-scale production of α-amylase using a solid-state fermenter of capacity 600 L was attempted using GOC as a substrate at a pH of 4.5, incubation temperature of 32.5 °C, and incubation period of 108 h and the enzyme activity of about 10,994.74 U/gds was obtained. Therefore, the optimized process can be used for commercial enzyme production. The improved thermal and pH stability of the enzyme could be an added advantage for many industrial applications.
Microorganism, culture conditions, and substrates
The fungal strain viz., A. oryzae (MTCC 3107) was obtained from the Microbial Type Culture Collection (MTCC), Chandigarh. A. flavus and A. oryzae cultures were maintained on yeast extract malt extract agar and Czapek Dox agar, respectively. Potato–dextrose agar was also used for the growth and maintenance of the cultures. The cultures were grown at 30 °C for seven days and then stored at 4 °C. The powdered edible oil cakes, namely groundnut, coconut, and sesame oil cakes were selected as substrates. GOC and COC were purchased from M/s. Savithri Oil Mill, Coimbatore, and SOC were purchased from M/s. SSD Oil Mill Company, Coimbatore. The composition of oil cakes such as total carbon and nitrogen content was estimated using the total carbon analyzer Leco CS300 and by the Kjeldahl method, respectively . Dry weights of the substrates were estimated by drying them in a hot air oven (Hasthas Make model D1005) at 105 °C for 24 h until a constant weight. The substrates were powdered and sieved using standard sieves to eliminate the foreign materials and stored in aseptic conditions for further experiments.
Inoculum preparation and solid-state fermentation
Spores of 7-day-old fungal cultures were scrapped using an inoculation loop and aseptically transferred to sterile distilled water containing 0.1% Tween-80. Exactly 1 mL (1 × 107 mL− 1 spores) of spore suspension was used as inoculum for the entire fermentation. About 5 g of dry oil cake was taken into a 250-mL Erlenmeyer flask, containing 2 mL of mineral salts solution containing 2 g of potassium dihydrogen phosphate (KH2PO4), 5 g of ammonium nitrate (NH4NO3), 1 g of sodium chloride (NaCl), and 1 g of magnesium dihydrogen sulfate (MgSO4.7H2O) in a liter of distilled water to adjust the required moisture level. All the contents were mixed, autoclaved at 121 °C for 20 min, and cooled. Spore suspensions were inoculated on the sterile solid substrate and incubated in a solid-state fermenter (M/s. Lark Innovative, Chennai) maintained at 37 °C.
Development of a pilot-scale solid state fermenter
Amylase production was optimized using a designed solid-state fermenter. A pilot-scale solid-state fermenter of 600 L capacity was fabricated at the Department of Food and Agricultural Process Engineering, Tamil Nadu Agricultural University, Coimbatore. A fan was fixed at the center of the chamber to maintain the temperature. A relative humidity (RH) sensor was placed inside the chamber to monitor the RH of the chamber. A compressor and water supply were connected to spray water inside the chamber whenever RH decreased below the desired level. Under optimum conditions, the microorganisms or cells were able to perform their desired functions. Temperature and RH inside the chamber were monitored and controlled using sensors and controllers, respectively. The bioreactor had four trays, an RH sensor, a temperature controller, and a control system networked together. A thermocouple or Pt 100 was incorporated into the pH sensor. The pH electrode working in the range of 0 to 13 was used. When pH change exceeded the set range, 0.1 N HCl or 0.1 N NaOH was added based on the measured value.
Enzyme extraction and assay conditions
A known quantity of fermented substrate was mixed with double distilled water along with 0.1% Tween 80. The contents were shaken in a rotary shaker and then centrifuged at 7000 g at 4 °C for 10 min. The reaction mixture consisted of 1.25 mL of 1% soluble starch, 0.25 mL of 0.1 M acetate buffer (pH 5.0), 0.25 mL of distilled water, and 0.25 mL of crude enzyme extract. After 10-min incubation at 50 °C, the liberated reducing sugars (glucose equivalents) were estimated using the dinitrosalicylic acid (DNS) method . The intensity of color developed was measured at 540 nm using a Shimadzu UV-160A spectrophotometer . The blank contained 0.5 mL of 0.1 M acetate buffer (pH 5.0), 1.25 mL of 1% starch solution, and 0.25 mL of distilled water. One unit (IU) of α-amylase was defined as the amount of enzyme releasing one μmol glucose equivalent per minute under the assay conditions.
The crude enzyme was saturated up to 50% using ammonium sulfate and incubated at 4 °C overnight for precipitation of proteins. The sample was centrifuged for 15 min (7000 rpm at 4 °C) in a refrigerated centrifuge (ThermoFisher X1, India). The supernatant-containing residues were discarded and the precipitate was used as an enzyme source.
Effect of pH and temperature on enzyme stability
The effect of pH on enzyme stability was studied by incubating 0.5 mL of the crude enzyme at different pH ranging from 3 to 9 , and varying temperatures ranging from 25 to 70 °C . The pH was altered by varying the concentrations of citrate buffer and glycine-NaOH buffer solutions.
Optimization of process parameters for production of α-amylase using a statistical approach
The production of α-amylase by A. oryzae was investigated using the Box–Behnken design. About 17 experimental runs were performed to determine the effect of all process parameters on α-amylase production. The effect of pH (range 3–6)  incubation temperature (range 25–40 °C) , and incubation time (range 72–120 h)  on the production of α-amylase produced by A. oryzae using edible oil cake as a substrate was evaluated (Table 1). The BBD was used to determine the levels of significance and interaction between independent variables. The independent variables were studied at three different levels viz., low (− 1), medium (0), and high (+ 1). All experiments were performed in triplicate, and the amount of α-amylase produced was considered as a dependent variable or response (Y). The second-order polynomial coefficients were calculated and analyzed using the “Design Expert” (Version 6.0.8, Stat-Ease Inc., Minneapolis, USA) statistical package. Statistical analysis (analysis of variance) of the model was performed. The analysis also included Fisher’s F-test (overall model significance), its associated probability p (F), correlation coefficient (R), and determination coefficient (R2) to measure the goodness of fit of the regression model according to Dey et al. . The regression equation to explain the influence of pH, incubation temperature, and incubation period on α-amylase production is given as.
where R is the response calculated by the model; bo is the intercept; b1, b2, and b3 are the linear effects; b11, b22, and b33 are quadratic effects; b12, b13, and b23 are the interaction coefficients; X1 is the pH; X2 is the incubation temperature (°C); and X3 is the incubation period (h).
Availability of data and materials
All data are included in the manuscript. No separate external data source is required. Any additional information required will be provided by communicating with the corresponding author via the official e-mail: email@example.com.
Analysis of variance
Groundnut oil cake
Sesame oil cake
Coconut oil cake
degrees of freedom
gram dry substrate
- KH2PO4 :
Potassium dihydrogen phosphate
Response surface methodology
Solid state fermentation
Microbial Type Culture Collection
Elyasi Far B, Ahmadi Y, Yari Khosroshahi A, Dilmaghani A, et al. Adv Pharm Bull. 2020;10(3):350–8. https://0-doi-org.brum.beds.ac.uk/10.34172/apb.2020.043.
Sudan SK, Kumar N, Kaur I, Sahni G. Production, purification and characterization of raw starch hydrolyzing thermostable acidic alpha-amylase from hot springs, India. Int J Biol Macromol. 2018;117:831–9. https://0-doi-org.brum.beds.ac.uk/10.1016/j.ijbiomac.2018.05.231.
Jujjavarapu SE, Dhagat S. Evolutionary trends in industrial production of alpha-amylase. Recent Pat Biotechnol. 2019;13(1):4–18. https://0-doi-org.brum.beds.ac.uk/10.2174/2211550107666180816093436.
Sethi BK, Jana A, Nanda PK, DasMohapatra PK, Sahoo SL, Patra JK. Production of alpha-Amylase by Aspergillus terreus NCFT 4269.10 Using Pearl Millet and Its Structural Characterization. Front Plant Sci. 2016;7:639.
Porfirif MC, Milatich EJ, Farruggia BM, Romanini D. Production of alpha-amylase from Aspergillus oryzae for several industrial applications in a single step. J Chromatogr B Analyt Technol Biomed Life Sci. 2016;1022:87–92. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jchromb.2016.04.015.
Sonnleitner B, Fiechter A. Advantages of using thermophiles in biotechnological processes: expectations and reality. Trends Biotechnol. 1983;1(3):74–80. https://0-doi-org.brum.beds.ac.uk/10.1016/0167-7799(83)90056-2.
Van der Maarel MJ, Van der Veen B, Uitdehaag JC, Leemhuis H, Dijkhuizen L. Properties and applications of starch-converting enzymes of the α-amylase family. J Biotechnol. 2002;94(2):137–55. https://0-doi-org.brum.beds.ac.uk/10.1016/S0168-1656(01)00407-2.
Shafique S, Bajwa R, Shafique S. Screening of Aspergillus niger and A. flavus strains for extra cellular alpha-amylase activity. Pak J Bot. 2009;41(2):897–905.
Selvakumar P, Ashakumary L, Pandey A. Biosynthesis of glucoamylase from Aspergillus niger by solid-state fermentation using tea waste as the basis of a solid substrate. Bioresour Technol. 1998;65(1–2):83–5. https://0-doi-org.brum.beds.ac.uk/10.1016/S0960-8524(98)00012-1.
Arunsasi M, Kani SM, Jegadeesh G, Ravikumar M. Submerged fermentation of amylase enzyme by Aspergillus flavus using Cocos nucifera meal. Kathmandu Univ J Sci Eng Technol. 2010;6(2):75–87.
Naili B, Sahnoun M, Bejar S, Kammoun R. Optimization of submerged Aspergillus oryzae S2 alpha-amylase production. Food Sci Biotechnol. 2016;25(1):185–92. https://0-doi-org.brum.beds.ac.uk/10.1007/s10068-016-0028-4.
Sahnoun M, Kriaa M, Elgharbi F, Ayadi DZ, Bejar S, Kammoun R. Aspergillus oryzae S2 alpha-amylase production under solid state fermentation: optimization of culture conditions. Int J Biol Macromol. 2015;75:73–80. https://0-doi-org.brum.beds.ac.uk/10.1016/j.ijbiomac.2015.01.026.
Michelin M, Silva TM, Benassi VM, Peixoto-Nogueira SC, Moraes LAB, Leão JM, Jorge JA, Terenzi HF, Maria de Lourdes T. Purification and characterization of a thermostable α-amylase produced by the fungus Paecilomyces variotii. Carbohydr Res. 2010;345(16):2348–53. https://0-doi-org.brum.beds.ac.uk/10.1016/j.carres.2010.08.013.
Francis F, Sabu A, Nampoothiri KM, Szakacs G, Pandey A. Synthesis of α-amylase by Aspergillus oryzae in solid-state fermentation. J Basic Microbiol. 2002;42(5):320–6. https://0-doi-org.brum.beds.ac.uk/10.1002/1521-4028(200210)42:5<320::AID-JOBM320>3.0.CO;2-6.
Gangadharan D, Sivaramakrishnan S, Nampoothiri KM, Sukumaran RK, Pandey A. Response surface methodology for the optimization of alpha amylase production by Bacillus amyloliquefaciens. Bioresour Technol. 2008;99(11):4597–602. https://0-doi-org.brum.beds.ac.uk/10.1016/j.biortech.2007.07.028.
Zambare V. Solid state fermentation of Aspergillus oryzae for glucoamylase production on agro residues. Int J Life Sci. 2010;4:16–25. https://0-doi-org.brum.beds.ac.uk/10.3126/ijls.v4i0.2892.
Sadh PK, Chawla P, Bhandari L, Duhan JS. Bio-enrichment of functional properties of peanut oil cakes by solid state fermentation using Aspergillus oryzae. J Food Measurement Characterization. 2018;12(1):622–33. https://0-doi-org.brum.beds.ac.uk/10.1007/s11694-017-9675-2.
Melnichuk N, Braia MJ, Anselmi PA, Meini M-R, Romanini D. Valorization of two agroindustrial wastes to produce alpha-amylase enzyme from Aspergillus oryzae by solid-state fermentation. Waste Manag. 2020;106:155–61. https://0-doi-org.brum.beds.ac.uk/10.1016/j.wasman.2020.03.025.
Kamaraj M, Subramaniam D. Optimization of experimental variables for the production of α-amylase by Aspergillus oryzae using rice bran. Int J Adv Res Eng Technol. 2020;11(6).
Bozic N, Slavic MS, Gavrilovic A, Vujcic Z. Production of raw-starch-digesting alpha-amylase isoform from Bacillus sp. under solid-state fermentation and biochemical characterization. Bioprocess Biosyst Eng. 2014;37(7):1353–60. https://0-doi-org.brum.beds.ac.uk/10.1007/s00449-013-1105-1.
Swain MR, Kar S, Padmaja G, Ray RC. Partial characterization and optimization of production of extracellular alpha-amylase from Bacillus subtilis isolated from culturable cow dung microflora. Pol J Microbiol. 2006;55(4):289–96.
Ramachandran S, Patel AK, Nampoothiri KM, Francis F, Nagy V, Szakacs G, Pandey A. Coconut oil cake--a potential raw material for the production of alpha-amylase. Bioresour Technol. 2004;93(2):169–74. https://0-doi-org.brum.beds.ac.uk/10.1016/j.biortech.2003.10.021.
Viswanathan P, Surlikar NR. Production of alpha-amylase with Aspergillus flavus on Amaranthus grains by solid-state fermentation. J Basic Microbiol. 2001;41(1):57–64. https://0-doi-org.brum.beds.ac.uk/10.1002/1521-4028(200103)41:1<57::AID-JOBM57>3.0.CO;2-S.
Shirodkar PV, Muraleedharan UD. Enhanced alpha-amylase production by a marine protist, Ulkenia sp. using response surface methodology and genetic algorithm. Prep Biochem Biotechnol. 2017;47(10):1043–9. https://0-doi-org.brum.beds.ac.uk/10.1080/10826068.2017.1373293.
Kar S, Ray RC, Mohapatra UB. Alpha-amylase production by Streptomyces erumpens MTCC 7317 in solid-state fermentation using response surface methodology (RSM). Pol J Microbiol. 2008;57(4):289–96.
Bogar B, Szakacs G, Tengerdy RP, Linden JC, Pandey A. Production of alpha-amylase with Aspergillus oryzae on spent brewing grain by solid substrate fermentation. Appl Biochem Biotechnol. 2002;102–103(1–6):453–61. https://0-doi-org.brum.beds.ac.uk/10.1385/abab:102-103:1-6:453.
Kumar D, Yadav KK, Muthukumar M, Garg N. Production and characterization of alpha-amylase from mango kernel by Fusarium solani NAIMCC-F-02956 using submerged fermentation. J Environ Biol. 2013;34(6):1053–8.
Kumar R, Sharma J, Singh R. Production of tannase from Aspergillus ruber under solid-state fermentation using jamun (Syzygium cumini) leaves. Microbiol Res. 2007;162(4):384–90. https://0-doi-org.brum.beds.ac.uk/10.1016/j.micres.2006.06.012.
Bhanja T, Rout S, Banerjee R, Bhattacharyya BC. Comparative profiles of alpha-amylase production in conventional tray reactor and GROWTEK bioreactor. Bioprocess Biosyst Eng. 2007;30(5):369–76. https://0-doi-org.brum.beds.ac.uk/10.1007/s00449-007-0133-0.
Wang YC, Zhao N, Ma JW, Liu J, Yan QJ, Jiang ZQ. High-level expression of a novel alpha-amylase from Thermomyces dupontii in Pichia pastoris and its application in maltose syrup production. Int J Biol Macromol. 2019;127:683–92. https://0-doi-org.brum.beds.ac.uk/10.1016/j.ijbiomac.2019.01.162.
Msarah MJ, Ibrahim I, Hamid AA, Aqma WS. Optimisation and production of alpha amylase from thermophilic Bacillus spp. and its application in food waste biodegradation. Heliyon. 2020;6(6):e04183.
Priyadarshini S, Pradhan SK, Ray P. Production, characterization and application of thermostable, alkaline alpha-amylase (AA11) from Bacillus cereus strain SP-CH11 isolated from Chilika Lake. Int J Biol Macromol. 2020;145:804–12. https://0-doi-org.brum.beds.ac.uk/10.1016/j.ijbiomac.2019.11.149.
Jones DB. Factors for converting percentages of nitrogen in foods and feeds into percentages of proteins: US Department of Agriculture; 1931.
Miller G. Determination of reducing sugar by DNS method. Anal Chem. 1959;31(3):426–8. https://0-doi-org.brum.beds.ac.uk/10.1021/ac60147a030.
Arshad R, Mohyuddin A, Saeed S, μL Hassan A. Optimized production of tannase and gallic acid from fruit seeds by solid state fermentation. Trop J Pharm Res. 2019;18(5).
Dey G, Mitra A, Banerjee R, Maiti B. Enhanced production of amylase by optimization of nutritional constituents using response surface methodology. Biochem Eng J. 2001;7(3):227–31. https://0-doi-org.brum.beds.ac.uk/10.1016/S1369-703X(00)00139-X.
We acknowledge the Metabolomic and Proteomic Analytical Facility (MPAF) at the Tamil Nadu Agricultural University, Coimbatore, India, for sharing their equipment for various analyses carried out in this study.
This study was funded by the All India Coordinated Research Project on Post Harvest Engineering and Technology, ICAR, Government of India (PH/CO/14/01: Process development for the production of food enzymes from edible deoiled cakes) support to MB. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Ethics approval and consent to participate
No specific permissions were required for the described studies because no human or animal subjects were involved in this research.
Consent for publication
All authors agreed to publish the content.
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Balakrishnan, M., Jeevarathinam, G., Kumar, S.K.S. et al. Optimization and scale-up of α-amylase production by Aspergillus oryzae using solid-state fermentation of edible oil cakes. BMC Biotechnol 21, 33 (2021). https://0-doi-org.brum.beds.ac.uk/10.1186/s12896-021-00686-7
- Solid-state fermentation
- Aspergillus oryzae
- Edible oil cake
- Pilot-scale fermenter