- Research article
- Open Access
Creation of Golden Gate constructs for gene doctoring
BMC Biotechnology volume 20, Article number: 54 (2020)
Gene doctoring is an efficient recombination-based genetic engineering approach to mutagenesis of the bacterial chromosome that combines the λ-Red recombination system with a suicide donor plasmid that is cleaved in vivo to generate linear DNA fragments suitable for recombination. The use of a suicide donor plasmid makes Gene Doctoring more efficient than other recombineering technologies. However, generation of donor plasmids typically requires multiple cloning and screening steps.
We constructed a simplified acceptor plasmid, called pDOC-GG, for the assembly of multiple DNA fragments precisely and simultaneously to form a donor plasmid using Golden Gate assembly. Successful constructs can easily be identified through blue-white screening. We demonstrated proof of principle by inserting a gene for green fluorescent protein into the chromosome of Escherichia coli. We also provided related genetic parts to assist in the construction of mutagenesis cassettes with a tetracycline-selectable marker.
Our plasmid greatly simplifies the construction of Gene Doctoring donor plasmids and allows for the assembly of complex, multi-part insertion or deletion cassettes with a free choice of target sites and selection markers. The tools we developed are applicable to gene editing for a wide variety of purposes in Enterobacteriaceae and potentially in other diverse bacterial families.
Over 10 years ago, Lee et al.  developed the gene doctoring approach for efficient mutagenesis of Escherichia coli, targeting the λ-Red recombination system  to a mutation cassette flanked by homologous regions and released from a suicide donor plasmid by the I-SceI meganuclease. Delivery of the mutagenesis cassette from a plasmid rather than as a linear DNA fragment protects the DNA from attack by host nucleases and leads to higher-efficiency recombination. Since then, the gene doctoring technique has been refined  and used in other bacterial species, including Salmonella enterica , Pseudomonas putida , and Klebsiella pneumoniae . However, construction of donor plasmids suitable for gene doctoring typically relies on multiple, sequential steps.
Golden Gate assembly [7, 8] provides a method for one-step combinatorial DNA assembly which, we hoped, could simplify construction of mutagenesis cassettes for gene doctoring. We therefore set about creating a plasmid into which multiple genetic elements could be inserted via a single Golden Gate reaction to produce a Gene Doctoring donor plasmid. Our plasmid, pDOC-GG, was based on pDOC-K from the original Gene Doctoring toolkit, but incorporated five changes to streamline the workflow from cloning to mutagenesis:
To improve compatibility with existing Golden Gate libraries, we changed the antibiotic resistance marker on the donor plasmid from bla (ampicillin resistance) to aph (3′)-Ia (kanamycin resistance).
We replaced the kanamycin resistance cassette of pDOC-K with a lacZα drop-out cassette flanked by BsaI restriction sites to create a Golden Gate cloning region. Following cloning and transformation, successful colonies can be identified by blue-white screening  based upon loss of the drop-out cassette.
We removed a BsaI site from the pDOC-K backbone, between the HR2 cloning region and the rrnB T1 terminator. This prevents interference from off-target cleavage of the plasmid by BsaI during cloning.
We removed both multiple cloning sites so that only a minimal 34 bp FRT site will remain in the chromosome following removal of a resistance marker .
We reduced the size of the plasmid backbone, to help avoid problems with transformation and stability of a large plasmid prior to mutagenesis.
By a combination of PCR and chemical synthesis, we obtained five linear DNA fragments encoding the necessary elements for pDOC-GG. Three fragments were derived from pDOC-K, while the other two encoded the new aph (3′)-Ia kanamycin resistance gene and the lacZα drop-out cassette. We then constructed pDOC-GG by ligating these fragments using Gibson assembly (Fig. 1) .
To construct a Gene Doctoring donor plasmid, a mutagenesis cassette is built from blocks of DNA with defined functions (known as genetic parts in the synthetic biology terminology) by Golden Gate assembly, replacing the lacZα cassette. Each mutagenesis cassette should begin with the first homologous region (HR1), ligated at its 5′ end to a CTAC BsaI overhang on pDOC-GG, and end with the second homologous region (HR2), ligated at its 3′ end to an ACGA overhang on pDOC-GG. Large numbers of intervening genetic parts can be assembled by designing them with sequential, overlapping BsaI overhangs. After verifying the correct sequence of the mutagenesis cassette, the donor plasmid can then be used for Gene Doctoring as described by Lee et al. .
In verifying the full sequence of pDOC-GG, we identified two inconsistencies from the previously published pDOC-K sequence: a deletion of a T at bp 4268 and a 23 bp insertion starting at bp 4336 (both numbered and with reference to pDOC-K). Since neither of the variations are in a coding or regulatory region, and since they are present in the original, widely used, Gene Doctoring plasmid we have no reason to suspect that they are significant for the function of the plasmid. We confirmed the function of pDOC-GG in E. coli by growth in the presence of kanamycin and generation of blue colonies in the presence of 5-bromo-4-chloro-3-indolyl-β-D-galactopyranoside (X-gal) and isopropyl β-D-1-thiogalactopyranoside (IPTG).
We also produced two plasmid-borne genetic parts consisting of a tetracycline resistance cassette (tetA gene with a promoter and terminator) with different BsaI overhangs, flanked by FRT sites, in an AmpR variant of mUAV . These simplify the design of chromosomal insertions with the scar sequence on either side of the insertion to minimise polar effects on surrounding genes after removal of the tetA cassette by Flp recombinase (Fig. 2) .
To test the function of pDOC-GG for cloning and mutagenesis, we used it to insert sfgfp, encoding superfolder green fluorescent protein (sfGFP) into a highly conserved chromosomal locus downstream of the glmS gene of E. coli (referred to here as the glmS site), where fitness impacts from disruption are known to be minimal in multiple species [14,15,16]. Our mutagenesis cassette used one of the new tetA genetic parts immediately after HR1, followed by sfgfp in the reverse orientation relative to glmS (Fig. 2). Following Golden Gate cloning, we obtained almost exclusively white colonies on plates containing kanamycin, tetracycline, X-gal and IPTG. The white colonies fluoresced green under a blue-light lamp and developed a green colour following prolonged incubation (~ 24 h), confirming the function of sfgfp. All the green colonies (6/6) picked for screening by colony PCR with primers pDOC-K_F and pDOC-K_R had inserts of the expected length.
We purified the donor plasmid from one of the successful colonies and used it, together with pACBSCE , for mutagenesis by Gene Doctoring. We confirmed successful integration of tetA and sfgfp into the chromosome by colony PCR using primers glmS_screen_F and glmS_screen_R (Table 2). Out of 50 randomly chosen colonies screened, 43 (86%) grew on LB agar with tetracycline and sucrose and gave a colony PCR product of the expected size in agarose gel electrophoresis (Supplementary Figure 1). This compares favourably with the 90–93% integration efficiency (depending on the gene) reported for E. coli MG1655 by Lee et al . The slight reduction in efficiency in our experiments is probably due to the larger mutagenesis fragment required for insertion of sfgfp plus a selection cassette rather than only the selection cassette required for the gene knockouts performed in the original paper.
Successful colonies were white and did not noticeably fluoresce under blue light, both before and after removal of the tetracycline resistance cassette (Fig. 3). However, the cells fluoresced green when viewed by fluorescence microscopy, confirming the function of the chromosomal insertion. The reduction in green coloration for cells with sfgfp on the chromosome is due to the lower gene copy number compared to expression from a plasmid. We performed whole-genome shotgun sequencing on the final, tetracycline-sensitive cells to confirm the correct location and sequence of the sfgfp insertion, the absence of off-target recombination events and the loss of all plasmids (Supplementary Figure 2).
Gene Doctoring is a convenient and efficient variation of recombineering, especially for non-domesticated and pathogenic strains of E. coli, which are often not amenable to transformation by the linear double-stranded DNA required by other methods. pDOC-GG harnesses Golden Gate assembly for single-reaction construction of donor plasmids, thus increasing the utility of Gene Doctoring by removing the number of cloning steps required to generate the donor plasmid, while retaining the advantages of the original system (Fig. 4). Our approach also theoretically allows a free choice of target sites, selection cassettes and type of modification (insertions, deletions, inversions, replacements and point mutations), while allowing integration with existing genetic part libraries, including those conforming to the popular MoClo molecular parts standard .
Although we have retained the original Flp recombinase-based technique for removal of the selectable marker in our experiments, scarless genome editing is possible using tetA as a counterselection marker . Alternatively, any other selectable marker(s) can be used instead, to suit individual experimental requirements [19,20,21,22,23]. Regions HR1 and HR2 will vary between experiments and can easily be produced either as chemically synthesised DNA fragments, PCR products (with BsaI sites included on the primers) or from genetic parts libraries. We have made pDOC-GG publicly available, together with our ampR version of mUAV and our genetic parts for inclusion of a tetA selection cassette on either side of an insertion (Table 1). We encourage further modification and sharing of these plasmids to broaden the available toolkit for Gene Doctoring of diverse targets and species with minimal effort.
Materials and methods
E. coli NEB5α (New England BioLabs product № C2987) or NEB10β (New England BioLabs product № C3019) cells were used as hosts during plasmid construction. Genome manipulations were performed on E. coli strain AW405 (a K-12 derivative), which was a gift from Howard Berg (Harvard University) .
Competent cell production and transformation
E. coli competent cells were prepared following the CaCl2 method of Sambrook et al.  and transformed by heat-shock at 42 °C for 45 s followed by recovery in SOC medium.
Construction of pDOC-GG
Beginning with pDOC-K, we engineered substantial modifications to produce a golden gate acceptor plasmid, named pDOC-GG, to enable single-step construction of donor plasmids. A 3308 bp DNA fragment containing the sacB expression cassette was amplified from pDOC-K by PCR with primers sacB_GA_F and sacB_GA_R (Fig. 1, Table 2) to add overlap regions for Gibson assembly. Four further fragments were then purchased as gBlocks from IDT (Leuven, Belgium). These fragments were a KanR cassette, the pMB1 and 5′ I-SceI recognition sequence, a lacZα reporter gene with flanking BsaI sites, and the 3′ I-SceI fragment (Fig. 1, Table 2). Each fragment was designed with appropriate sequences at each end to generate overlapping regions between neighbouring fragments for Gibson assembly. The Gibson assembly reaction contained 12 fmol of the sacB fragment, 10 fmol of the kanamycin resistance fragment, 50 fmol of the 3′ fragment and 20 fmol each of the remaining fragments in 5.5 μL, and an equal volume of 2× Gibson assembly master mix (NEB, Hitchin, UK). The reaction was incubated at 50 °C for 60 min, then 5 μL were used to transform NEB5α chemically competent cells, which were plated on LB agar containing kanamycin (50 μg.mL− 1), IPTG (1 mM) and X-gal (20 μg.mL− 1). Five blue colonies were selected and the plasmids were sequenced.
Cloning of genetic parts
The genes for sfGFP and TetR were cloned into plasmids to create genetic parts for Golden Gate assembly. The sfgfp gene was amplified together with its promoter and terminator by PCR using Q5 DNA polymerase (NEB, Hitchin, U.K.) and primers J23106_FOR and sfGFPterm_REV (Table 2) according to the manufacturer’s instructions. The template was plasmid pMA_Level2A . The primers were designed to add BsaI sites for 5′ AGGT and 3′ CGCT overhangs, which caused sfgfp to be inserted in the reverse orientation relative to glmS. The PCR product was gel purified and then cloned into pMiniT 2.0 using a PCR cloning kit (NEB, Hitchin, U.K.) with NEB10β competent cells according to the manufacturer’s instructions. The tetracycline resistance cassettes were cloned into an ampicillin-resistant variant of plasmid mUAV from the Mobius Assembly Vector Toolkit (Addgene kit #1000000134) . The β-lactamase (bla) gene was amplified by PCR from pMiniT 2.0 using primers Pbla_F_AatII and Pbla_R_SacI (Table 2), digested with AatII and SacI, and ligated to mUAV linearized with the same enzymes. Correct constructs were identified by colony PCR with primers mUAV_AmpR_screen_F and mUAV_AmpR_screen_R (Table 2). The new plasmid was named mUAVbla. The tetracycline resistance cassettes were each synthesized as two halves (Table 2) with AarI recognition sites to ligate them into mUAVbla as a full coding sequence, complete with promoter, terminator and flanking FRT sites, in a Golden Gate reaction, according to Andreou & Nakayama,  resulting in mUAVbla:tetR 5′ and mUAVbla:tetR 3′. Plasmids containing tetA were identified phenotypically and by colony PCR using primers pBRforEco and L4440 (Table 2), and the sequences of the plasmids were verified before use.
Golden Gate assembly of gene doctoring donor plasmids
Donor plasmids were created from pDOC-GG in a Golden Gate assembly reaction using 10 fmol each of pDOC-GG and pre-cloned DNA sequences and 20 fmol of chemically synthesized sequences, 1 μL T4 DNA ligase buffer, 200 μg.mL− 1 bovine serum albumin, 0.5 μL T4 DNA ligase (NEB, Hitchin, U.K.) and 0.5 μL BsaI-HF v2 (NEB, Hitchin, U.K.) in a 10 μL reaction. The reaction consisted of 30 cycles of 37 °C for 3 min and 16 °C for 4 min followed by an incubation at 50 °C for 5 min and finally at 80 °C for 5 min. NEB5α cells were transformed using 2 μL of the reaction mix and white colonies growing on LB agar containing kanamycin (50 μg.mL− 1), tetracycline (10 μg.mL− 1), IPTG (500 mM) and X-gal (20 μg.mL− 1) were picked for screening.
For induction of chromosomal integrations, the strain to be modified was transformed with the pDOC-GG-derived donor plasmid and the pACBSCE helper plasmid carrying the λ-Red genes. A single colony carrying both plasmids was grown in 500 μL of Miller’s LB medium with appropriate antibiotics at 37 °C for 4 h. The cells were pelleted and washed three times in filter sterilized 0.1× LB. They were then resuspended in 500 μL of 0.1× LB supplemented with 0.5% arabinose and incubated at 37 °C for 2–3 h for induction. 100 μL were plated on LB plates supplemented with tetracycline (10 μg.mL− 1) and 5% sucrose. The plates were incubated at room temperature for 48–72 h. Single colonies were checked for sfgfp insertion by colony PCR with primers glmS screen F and glmS screen R, annealing either side of the region to be modified. Absence of Gene Doctoring plasmids was checked by patching colonies to LB agar plates containing appropriate antibiotics and an index plate containing no antibiotic.
Antibiotic resistance cassette removal
For the removal of the tetracycline resistance cassette, AW405::tetA-sfgfp was transformed with plasmid pCP20, carrying the genes for Flp recombinase activity,  and recovered at 30 °C on LB agar plates supplemented with carbenicillin (50 μg.mL− 1). Antibiotic cassette removal was confirmed by colony PCR with glmS screen F and glmS screen R, and by patching colonies to LB agar plates with and without tetracycline (10 μg.mL− 1) The antibiotic-sensitive clones were sub-cultured on LB agar at 42 °C to remove pCP20, which has a temperature-sensitive origin of replication. Absence of all plasmids was confirmed by testing the colonies’ sensitivity to all relevant antibiotics and the final modified strain was verified by whole-genome shotgun sequencing.
Whole genome and whole plasmid shotgun sequencing
Genomic DNA was purified using a FastDNA Spin Kit for feces (MP Bio, Santa Ana, CA, U.S.A.) according to the manufacturer’s instructions, except that the final elution was in 200 μL of DNAse-free water rather than 60 μL. Plasmids were purified with a NucleoSpin Plasmid Miniprep kit (Macherey-Nagel, Düren, Germany). The DNA was quantified using a Quant-iT dsDNA high sensitivity assay kit (Thermo Fisher, Waltham, MA, U.S.A.) and normalised to 0.2 ng.μL− 1 in 10 mM Tris-HCl. Sequencing libraries were prepared with the Nextera XT DNA Library Prep kit (Illumina, San Diego, CA, U.S.A.). Libraries were quantified using the Quant-iT dsDNA high sensitivity assay kit. Genome samples were pooled in equal quantities, while plasmid libraries were first pooled together and the whole plasmid pool was added to the genomic pool at one-tenth the quantity of a genomic sample. The final pool was then run at a concentration of 1.8 pM on an Illumina NextSeq 500 instrument using a mid-output sequencing kit for 150 bp paired-end reads. Sequences were quality checked by FastQC v0.11.7 and trimmed with Trimmomatic v0.36 with a minimum read length of 40 bp and a sliding window of 4 bp with average quality of 15. The reads were then mapped against the expected sequence for each sample in Geneious Prime 2019 with the Geneious mapper and default settings.
Availability of data and materials
All data generated or analysed during this study are included in this published article. The full sequences of the plasmids constructed for this study are available in the Addgene plasmid database under the accession numbers given in Table 1 and the plasmids are available from Addgene on request.
Homologous Region 1/2
Polymerase Chain Reaction
Lee DJ, Bingle LE, Heurlier K, Pallen MJ, Penn CW, Busby SJ, et al. Gene doctoring: a method for recombineering in laboratory and pathogenic Escherichia coli strains. BMC Microbiol. 2009;9(1):252 Available from: http://0-bmcmicrobiol.biomedcentral.com.brum.beds.ac.uk/articles/10.1186/1471-2180-9-252.
Datsenko KA, Wanner BL. One-step inactivation of chromosomal genes in Escherichia coli K-12 using PCR products. Proc Natl Acad Sci U S A. 2000;97(12):6640–5. Available from: https://0-doi-org.brum.beds.ac.uk/10.1073/pnas.120163297.
Wei Y, Deng P, Mohsin A, Yang Y, Zhou H, Guo M, et al. An electroporation-free method based on red recombineering for markerless deletion and genomic replacement in the Escherichia coli DH1 genome. PLoS One. 2017;12(10):e0186891 Available from: http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/pubmed/29065183.
Isom GL, Rooke JL, Antunes CA, Sheehan E, Wells TJ, Icke C, et al. Mammalian Cell Entry domains are required for bile resistance and virulence in Salmonella. BioRxiv. 2018. https://0-doi-org.brum.beds.ac.uk/10.1101/263871.
Moor H, Teppo A, Lahesaare A, Kivisaar M, Teras R. Fis overexpression enhances Pseudomonas putida biofilm formation by regulating the ratio of LapA and LapF. Microbiology. 2014;160(Pt 12):2681–93 Available from: http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/pubmed/25253613.
Jørgensen SB, Bojer MS, Boll EJ, Martin Y, Helmersen K, Skogstad M, et al. Heat-resistant, extended-spectrum β-lactamase-producing Klebsiella pneumoniae in endoscope-mediated outbreak. J Hosp Infect. 2016;93(1):57–62. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2016.01.014.
Wu D, Schandry N, Lahaye T. A modular toolbox for Golden-gate-based plasmid assembly streamlines the generation of Ralstonia solanacearum species complex knockout strains and multi-cassette complementation constructs. Mol Plant Pathol. 2018;19(6):1511–22. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1111/mpp.12632.
Engler C, Kandzia R, Marillonnet S. A one pot, one step, precision cloning method with high throughput capability. PLoS One. 2008;3(11):e3647. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1371/journal.pone.0003647.
Rüther U. Construction and properties of a new cloning vehicle, allowing direct sereening for recombinant plasmids. Mol Gen Genet. 1980;178(2):475–7. Available from: http://link.springer.com/10.1007/BF00270503.
Andrews BJ, Proteau GA, Beatty LG, Sadowski PD. The FLP recombinase of the 2 micron circle DNA of yeast: interaction with its target sequences. Cell. 1985;40(4):795–803. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1016/0092-8674(85)90339-3.
Gibson DG, Glass JI, Lartigue C, Noskov VN, Chuang R-Y, Algire MA, et al. Creation of a Bacterial Cell Controlled by a Chemically Synthesized Genome. Science. 2010;329(5987):52–6. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1126/science.1190719.
Andreou AI, Nakayama N. Mobius Assembly: A versatile Golden-Gate framework towards universal DNA assembly. PLoS One. 2018;13(1):e0189892. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1371/journal.pone.0189892.
Cherepanov PP, Wackernagel W. Gene disruption in Escherichia coli: TcR and KmR cassettes with the option of Flp-catalyzed excision of the antibiotic-resistance determinant. Gene. 1995;158(1):9–14. Available from: https://0-linkinghub-elsevier-com.brum.beds.ac.uk/retrieve/pii/037811199500193A.
Peters JE, Craig NL. Tn7: smarter than we thought. Nat Rev Mol Cell Biol. 2001;2(11):806–14. Available from:. https://doi.org/10.1038/35099006.
Choi K-H, Schweizer HP. mini-Tn7 insertion in bacteria with single attTn7 sites: example Pseudomonas aeruginosa. Nat Protoc. 2006;1(1):153–61 Available from: http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/pubmed/17406227.
Choi K-H, DeShazer D, Schweizer HP. Mini-Tn7 insertion in bacteria with multiple glmS-linked attTn7 sites: example Burkholderia mallei ATCC 23344. Nat Protoc. 2006;1(1):162–9. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1038/nprot.2006.25.
Weber E, Engler C, Gruetzner R, Werner S, Marillonnet S. A modular cloning system for standardized assembly of multigene constructs. PLoS One. 2011;6(2):e16765. Available from: https://dx.plos.org/10.1371/journal.pone.0016765.
Li X-T, Thomason LC, Sawitzke JA, Costantino N, Court DL. Positive and negative selection using the tetA-sacB cassette: recombineering and P1 transduction in Escherichia coli. Nucleic Acids Res. 2013;41(22):e204. Available from:. https://0-doi-org.brum.beds.ac.uk/10.1093/nar/gkt1075.
Wong QNY, Ng VCW, Lin CCM, Kung HF, Chan D, Huang JD. Efficient and seamless DNA recombineering using a thymidylate synthase a selection system in Escherichia coli. Nucleic Acids Res. 2005;33(6):1–9. Available from: https://0-academic-oup-com.brum.beds.ac.uk/nar/article-lookup/doi/10.1093/nar/gni059.
Stringer AM, Singh N, Yermakova A, Petrone BL, Amarasinghe JJ, Reyes-Diaz L, et al. FRUIT, a Scar-Free System for Targeted Chromosomal Mutagenesis, Epitope Tagging, and Promoter Replacement in Escherichia coli and Salmonella enterica. PLoS One. 2012;7(9):e44841. Available from: https://dx.plos.org/10.1371/journal.pone.0044841.
Tuntufye HN, Goddeeris BM. Use of lambda red-mediated recombineering and Cre/lox for generation of markerless chromosomal deletions in avian pathogenic Escherichia coli. FEMS Microbiol Lett. 2011;325(2):140–7. Available from: https://0-academic-oup-com.brum.beds.ac.uk/femsle/article-lookup/doi/10.1111/j.1574-6968.2011.02421.x.
Reyrat J, Pelicic V, Gicquel B. Counterselectable Markers : Untapped Tools for Bacterial Genetics and Pathogenesis. Infect Immun. 1998;66(9):4011–7. Available from: https://iai.asm.org/content/66/9/4011.
Lazarus JE, Warr AR, Kuehl CJ, Giorgio RT, Davis BM, Waldor MK. A new suite of allelic-exchange vectors for the scarless modification of proteobacterial genomes. Appl Environ Microbiol. 2019;85(16):1–14. Available from: http://0-aem.asm.org.brum.beds.ac.uk/lookup/doi/10.1128/AEM.00990-19.
Turner L, Ryu WS, Berg HC. Real-time imaging of fluorescent flagellar filaments. J Bacteriol. 2000;182(10):2793–801. Available from: https://jb.asm.org/content/182/10/2793.
Sambrook J, Fritsch EF, Maniatis T. Molecular cloning: a laboratory manual. Mol cloning a Lab manual. 1989; Available from: https://www.cabdirect.org/cabdirect/abstract/19901616061.
This research was funded by the Biotechnology and Biological Sciences Research Council (BBSRC) Institute Strategic Programme Microbes in the Food Chain BB/R012504/1 and its constituent project BBS/E/F/000PR10351. CZ was funded by a CSC scholarship. The funders played no part in the design of the study and collection, analysis, and interpretation of data or in writing the manuscript.
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Thomson, N.M., Zhang, C., Trampari, E. et al. Creation of Golden Gate constructs for gene doctoring. BMC Biotechnol 20, 54 (2020). https://0-doi-org.brum.beds.ac.uk/10.1186/s12896-020-00648-5
- Gene doctoring
- Golden Gate assembly