Skip to main content
Download PDF

Heavy ion mutagenesis combined with triclosan screening provides a new strategy for improving the arachidonic acid yield in Mortierella alpina

BMC Biotechnology volume 18, Article number: 23 (2018) Cite this article

Abstract

Background

Arachidonic acid (ARA), which is a ω-6 polyunsaturated fatty acid, has a wide range of biological activities and is an essential component of cellular membranes in some human tissues. Mortierella alpina is the best strain for industrial production of ARA. To increase its yield of arachidonic acid, heavy ion beam irradiation mutagenesis of Mortierella alpina was carried out in combination with triclosan and octyl gallate treatment.

Results

The obtained mutant strain F-23 ultimately achieved an ARA yield of 5.26 g L− 1, which is 3.24 times higher than that of the wild-type strain. In addition, quantitative real-time PCR confirmed that the expression levels of fatty acid synthase (FAS), Δ5-desaturase, Δ6-desaturase, and Δ9-desaturase were all significantly up-regulated in the mutant F-23 strain, especially Δ6- and Δ9-desaturase, which were up-regulated 3- and 2-fold, respectively.

Conclusions

This study confirmed a feasible mutagenesis breeding strategy for improving ARA production and provided a mutant of Mortierella alpina with high ARA yield.

Background

Arachidonic acid (ARA), which is a ω-6 polyunsaturated fatty acid, has a wide range of biological activities as it is a prerequisite for the synthesis of prostaglandins, thromboxane and leukotrienes [1]. For a long time, ARA was mainly obtained from animal tissues, such as animal livers, fish oil, and pig adrenal glands, which have low ARA contents and are limited sources [2]. Therefore, major efforts have been made to identify alternative sources of ARA. Mortierella alpina, which can accumulate a large amount of ARA in a short growth cycle, has received wide attention [3] and is considered the most prominent ARA-rich oil producer [4, 5]. Nevertheless, low yield and high cost are still the bottleneck for large-scale production of ARA by M.alpina.

At present, the genetic engineering method has been widely used in the increase of ARA production of M. alpina [6,7,8]. However, the metabolic regulation network of M. alpina is very complex [9, 10], changes in one or two genes are not easy to produce a transformant with the desired trait. Therefore, the mutagenesis method is still one of the effective methods to obtain high yield strains. In general, mutagenesis methods can be divided into two categories, physical mutagenesis and chemical mutagenesis. Heavy ion mutagenesis is a new physical mutagenesis technique with high bioavailability, high energy density, poor repair effects and good spatial resolution of energy deposition compared with traditional radiation sources (e.g., UV, γ- and χ-rays); thus, it can produce more extensive mutation [11,12,13]. As a chemical mutagenesis method, 5-fluorouracil (5-FU) is a structural analog of uracil that inhibits the synthesis of DNA and some RNA [14, 15], and it has been successfully used for microbial mutagenesis and cancer treatment as an effective chemical mutagen [16, 17].

Quickly identifying and screening out high-yield mutants are also important issues for breeding research. Directional screening is more effective than random selection and can reduce the amount of work [13]. From the anabolism pathway of ARA (Fig. 1), two key regulation points have been identified. The first is the synthesis of palmitic acid by fatty acid synthase (FAS), and the other is a series of desaturation reactions with stearic acid as the substrate that are catalyzed by Δ9 and Δ6- desaturase [18, 19]. Triclosan has a broad-spectrum antibacterial effect that can inhibit the activity of FAS by inhibiting the fabI locus [20]. Mutants that grow normally on a certain concentration of triclosan plates can be identified as having relatively high FAS activity, making them good candidates for lipid production. In addition, octyl gallate is a type of antioxidant that strongly inhibits the activities of fatty acid desaturases in fungi and viruses [21,22,23]. The octyl gallate mechanism of action may also involve membrane interactions that lead to the loss of membrane potential and cell gap leakage. Ken-ichi Fujita observed this phenomenon when studying the inhibitory effects of octyl gallate on Zygosaccharomyces bailii and Saccharomyces cerevisiae [24, 25]. Therefore, octyl gallate can be used as an effective reagent for screening high-yield ARA strains of M. alpina.

Fig. 1
figure 1

The ARA biosynthesis pathway and the action sites of inhibitors in Mortierella alpina

Full size image

In this study, the wild-type strain SD003 encountered two rounds of mutagenesis and targeted screening. First, heavy ion mutagenesis was combined with triclosan to screen strains with high FAS activity. Second, strains with high desaturase activity were screened by using octyl gallate after mutagenized with 5-fluorouracil. The two-step targeted screening strategy greatly improved the screening efficiency compared with the previous method of random selection. We also investigated the mechanism by which the ARA yield is increased in the mutagenized strain as well as the batch fermentation conditions for optimal production.

Methods

Strains and culture conditions

In the present study, M. alpina SD003 (CGMCC No.7960) was used as the initial strain. GY medium (glucose, 20 g L− 1; yeast extract, 10 g L− 1; and agar,20 g L− 1) was used to screen M. alpina. The seed culture medium contained glucose, 30 g L− 1; yeast extract, 6 g L− 1; KH2PO4, 3 g L− 1; NaNO3, 2.8 g L− 1; and MgSO4•7H2O, 0.5 g L− 1. The medium for the shake-flask and bioreactor fermentation cultures contained glucose, 80 g L− 1; yeast extract, 11 g L− 1; KH2PO4, 3.8 g L− 1; NaNO3, 3.5 g L− 1; and MgSO4•7H2O, 0.5 g L− 1. The seed cultures were grown at 25 °C with shaking at 200 rpm for 2 d and were then inoculated into shake flasks at 10% (v/v) inoculum and cultured at 25 °C with shaking at 200 rpm for 7 d. The bioreactor cultivations were performed in 5-L Biostat B plus bioreactors (Sartorius Stedim Biotech, Germany) containing 3 L of medium at 25 °C with stirring at 200 rpm for 10 d. Triclosan, octyl gallate, and 5-fluorouracil were purchased from Sangon Biotech Shanghai Co., Ltd. (Shanghai, China), Shanghai Yuanye Biological Technology Co., Ltd. and Alfa Aesar (China) Chemical Co., Ltd., respectively.

Heavy ion beam irradiation and triclosan screening

To obtain a stable, high-yield ARA strain, the overall experiment included a four-step screening program with gradually increased screening efficiency, as shown in Fig. 2. The detailed process is described below.

Fig. 2
figure 2

Schematics of the mutant screening experiment

Full size image

The first step was the preparation of the cell suspension. Spores of M. alpina SD003 were rinsed with sterile water and filtered through three layers of sterile lens paper. The spore suspension was centrifuged at 1900×g for 10 min and diluted with sterile water to a concentration of 106 spores mL− 1.

Then, the heavy ion beam irradiation experiments were carried out at the Heavy Ion Research Facility in Lanzhou (HIRFL) at the Institute of Modern Physics at the Chinese Academy of Sciences. A 12C6+ heavy ion beam was used with an energy of 80 MeV μ− 1 and an LET (the energy transferred per unit length) of 31 keV μm− 1. The heavy ion irradiation dose was 0, 40, 80, 120, 180, or 240 Gy. The irradiated spore suspension was diluted to 103 and 104 spores mL− 1, and 100 μL of the spore suspensions were coated on GY plate culture medium. Each dilution was performed in triplicate. After incubation in the dark at 25 °C for 3d, the mortality rate was calculated using the unirradiated spore suspension as a control.

To determine the optimal antimicrobial concentration of triclosan, the unirradiated spore suspension was treated with different triclosan concentrations (0, 0.1, 0.5, 0.6, 0.8, 1.0, 1.5, 2, 2.5 and 3 mgL− 1) on GY plates at 25 °C for 3 d, and the mortality rate was calculated. After determining the optimum concentration, the irradiated spores were properly diluted and incubated on plates containing this concentration of triclosan. After the passage of three generations, stable mutants were cultured and tested for ARA production. Consequently, the strain with the highest ARA yield, mutant Z-44, was selected for the next round of 5-fluorouracil mutagenesis.

5-fluorouracil mutagenesis and octyl gallate screening

5-fluorouracil mutagenesis was carried out as the third step of the breeding experiment. The mutant Z-44 obtained from the preceding steps was cultured in PDA medium for 10 d and then washed with 0.9% NaCl to prepare a spore suspension. One milliliter of the spore suspension (108 cells) was inoculated into a 50-mL Erlenmeyer flask containing 10 mL of 0.9% NaCl. After incubation for 12 h at 25 °C with shaking at 120 rpm, 5-fluorouracil was added to this starvation medium at a final concentration of 20 μg mL− 1. The mixture was incubated in a rotary shaker for 5 h, 10 h and 36 h at 25 °C with shaking at 120 rpm.

After 5-fluorouracil mutagenesis, the mutated spores were spread onto GY plates containing 14 μg mL− 1 of octyl gallate.

Determination of the genetic stability of the mutant

Mutant strains were passaged for 10 generations on PDA slants. Changes in the ARA production performance indexes of the strains were analyzed before and after passage.

Analytical methods

Determination of cell dry weight

Fermentation broth was filtered at room temperature, and the mycelia were washed twice with distilled water. The cell pellets were dried to a constant weight at 50 °C.

Total lipid extraction and fatty acid determination

Lipid extraction and transesterification were carried out according to a previously described method [26]. Total lipids were extracted using approximately 100 mg of mycelia (dry weight). Fatty acid methyl esters (FAMEs) were obtained by reacting the lipids with 2% sulfuric acid in methanol (v/v) at 85 °C for 2.5 h. FAMEs were extracted with n-hexane and analyzed using a gas chromatograph (Agilent Technologies) equipped with an HP-INNOWAX (30 m × 0.25 mm, 0.25 μm film thickness) capillary column. The oven temperature was set to 100 °C for 1 min and was then raised to 250 °C at a rate of 15 °C per min before being allowed to stand at 250 °C for 5 min. Peak detection was performed using a flame ionization detector (FID). The carrier gas was nitrogen, and the split ratio was 1:19. The injection volume was 1 μL.

Quantitative real-time PCR (qRT-PCR) analysis

After 7 d of fermentation, total RNA was extracted with an RNeasy Plant Mini Kit (QIAGEN, Germany) according to the manufacturer’s protocol. cDNA was prepared using a Revert Aid First Strand cDNA Synthesis Kit (Thermo Scientific), and the FastStart Universal SYBR Green Master Mix (ROX) was used for the PCR reactions. The qRT-PCR primers are listed in Table 1. Differences in gene expression were detected using a LightCycler R480 Real-time Detection System (Roche). 18SRNA was used as an internal control to normalize the expression levels. The comparison of CT method (2-ΔΔCT) was used to analyze the gene expression differences.

Table 1 Primers used in this study
Full size table

Results

Heavy ion beam irradiation-induced M. alpina mortality

Heavy ion mutagenesis has been successfully applied to plants [27, 28] and some industrial microbial mutagenesis breeding programs [11, 29], but as far as we know, this study is the first to use it with M. alpina. Due to a lack of reference conditions for the heavy ion mutagenesis of M. alpina, we investigated the lethality of five doses of heavy ion beam irradiation in this experiment. As shown in Fig. 3, at 40, 80, 120, 180 and 240 Gy, the lethality rates were 13%, 17%, 25%, 37%, and 71%, respectively. The lethality of spores increased as the dose increased, with a sharp increase to 71% at 240 Gy. In general, a lethality rate of 70–80% yields a high positive mutation rate [30]. Therefore, the heavy ion beam irradiation mutagenesis was performed at a 240 Gy dose in this study.

Fig. 3
figure 3

Mortality of Mortierella alpina SD003 treated with different doses of heavy ion beam irradiation. Data are the means of three replicate experiments, and the error bars indicate standard deviation

Full size image

Screening of high-yield ARA mutants with triclosan

Determining how to screen high-yield strains efficiently from a large number of mutants is the key issue in mutagenesis breeding experiments. When traditional shake flask fermentations are used as the means of screening, the screening cycle is long and troublesome. However, when triclosan is used as the screening method, the screening scope is much narrower, and the screening efficiency is greatly improved.

To determine the susceptibility of the wild-type strain to triclosan, M. alpina SD003 was spread onto GY plates containing different concentrations of triclosan. Triclosan was found to strongly inhibit the growth of the wild-type strain. The number of colonies decreased with increasing triclosan concentrations. The lethal rate was approximately 92.8% when the triclosan concentration was 2 mg L− 1. Thus, 2 mg L− 1 of triclosan was selected as a suitable concentration for screening mutants after heavy ion beam irradiation mutagenesis.

The spore suspensions treated with a heavy ion beam irradiation dose of 240 Gy were properly diluted, spread onto GY plates containing 2 mg L− 1 triclosan and incubated at 25 °C for 3 d. Only mutant strains with high FAS activity could grow and form large colonies. We randomly selected 120 large colonies and screened them three times on GY plates containing 2 mg L− 1 triclosan. Fifty-three mutants were still able to grow steadily. As shown in Fig. 4, 20 strains with high lipid and ARA contents were further screened via shake flask fermentations. The mutant Z-44 had the highest ARA production, with lipid and ARA yields of 9.65 g L− 1 and 3.80 g L− 1, which were 1.10 times and 2.06 times higher than that of the wild-type strain, respectively (Table 2).The mutant strain Z-44 mainly had an increased total lipid content (38.3% of the biomass), which was nearly double that of the wild-type strain (19.8%). Analyzing the fatty acid composition (Table 3) revealed that the ARA content of mutant Z-44 was significantly improved (from 27.04% to 39.37%) and that the ratio of C16:0 and C18:1 decreased significantly.

Fig. 4
figure 4

The total lipid and ARA contents of the isolated mutants in 250 mL shake flask after heavy ion beam irradiation mutagenesis. The initial glucose concentration was 80 g L− 1. “WT” indicates the wild-type strain. Numbers from Z-3 to Z-53 indicate the mutants

Full size image
Table 2 Productivity of wild-type strain, mutant strain Z-44 and F-23
Full size table
Table 3 Analysis of fatty acid composition of wild-type strain and mutant strains
Full size table

5-fluorouracil mutagenesis and octyl gallate screening of strains

To further improve the yield of ARA, the mutant strain Z-44 was used as the starting strain for the second round of mutagenesis with 5-fluorouracil, which is a compound similar to uracil that can be converted into effective fluorouracil deoxynucleotides that interfere with the synthesis of DNA. First, we studied the lethality of 5-fluorouracil after different treatment times. The results showed that the lethality rate was 50% at 5 h, 71% at 10 h and 93% at 36 h for 20 μg mL− 1 5-fluorouracil treatment. Therefore, considering the operability of the experiment, we ultimately selected 10 h as the processing time.

Alkyl gallate salts have been reported to be antioxidants with strong inhibitory effects on the Δ6-fatty acid desaturase in the ARA-producing fungi M. alpina 1S-4, and the inhibition of octyl gallate was the most obvious [25]. Therefore, strains resistant to octyl gallate may have high fatty acid desaturase activities, thereby promoting the formation of ARA. The lethal rate of octyl gallate at 12 μg mL− 1 was 50%, and it was 100% at 25 μg mL− 1. The lethal rate approached 86% when the spores were spread on GY plates containing 12 μg mL− 1 octyl gallate after treatment with 5-fluorouracil for 10 h. After 3 rounds of screening, 80 strains were selected for shake flask fermentation validation.

The ARA yield of the mutant strain F-23 was 5.26 g L− 1, which was the highest yield observed in the mutants and 3.24 times higher than that of the wild-type strain (1.24 g L− 1). The ARA content of the mutant F-23 was 49.08%, which was 81.51% higher than that of the wild-type strain (27.04%) and 24.66% higher than that of the mutant Z-44. Analysis of the fatty acid composition revealed that the C18:0 ratio was decreased significantly due to the rising catalytic capacity of the Δ9-desaturase (Fig. 5). The growth characteristics of the wild-type and two mutant strains, Z-44 and F-23, are shown in Tables 2 and 3.

Fig. 5
figure 5

Relative gene expression levels of fatty acid synthase (FAS), Δ5- desaturase, Δ6-desaturase, Δ9- desaturase and Δ12- desaturase of the wild-type, mutant Z-44 and mutant F-23 strains

Full size image

Expression levels of the endogenous FAS and Δ5, Δ6, Δ9 and Δ12-desaturase genes in the wild-type and mutant strains

To confirm the roles of triclosan and octyl gallate in the fatty acid synthesis pathway of M. alpina, five genes, fatty acid synthase, Δ5-desaturase, Δ6-desaturase, Δ9-desaturase, and Δ12-desaturase, that are related to ARA synthesis were analyzed by qRT-PCR at the mRNA level. As shown in Fig. 5, the mRNA expression level of FAS in mutant Z-44 was significantly up-regulated at a level 4.4 times higher than that of the wild-type strain. Therefore, the fatty acid synthase was the main locus of action of triclosan; some other studies have also demonstrated that triclosan inhibited the activity of enoyl-ACP reductase, which is a module of the FAS complex [19, 31, 32].

For the mutant F-23, which is a further mutagenized strain of the mutant Z-44, not only the expression level of FAS was increased by 3.1 times but the expression levels of all of the desaturases were also up-regulated, especially the Δ6 and Δ9-desaturases, which were significantly up-regulated by 3.2 and 2.1 times, respectively, compared to those of the wild-type strain (Fig. 5).

Genetic stability of the mutant

To investigate the genetic stability of the mutagenized strain, strain F-23 was cultured for 10 generations. Fermentation was carried out every five generations, and the biomass, lipid and ARA yields were measured three times. As shown in Table 4, the ARA yield was approximately 5.5 g L− 1, and the biomass was stable at approximately 29 g L− 1 after 10 generations, indicating that the mutant F-23 had good genetic stability.

Table 4 Genetic stability of mutant strain F-23
Full size table

Batch fermentation of mutant F-23

The mutant F-23 was further evaluated in batch fermentations in a 5-L bioreactor. The growth curves of F-23 and wild-type SD003 are shown in Fig. 6. The growth of the mycelia can be seen to experience three typical periods: delay, rapid growth and decay. The mutant F-23 had a relatively longer delay period (approximately 4 d) than wild-type SD003, possibly due to effects of mutagenesis on the expression of some genes or enzymes in vivo, resulting in a growth delay. The glucose consumption rate of both strains was basically the same. Subsequently, a more efficient logarithmic phase was observed in mutant F-23, which had a final biomass of 32.5 g L− 1, 14.04% higher than strain SD003. Finally, the decay period was observed in both of these strains after 8 d, and it was more obvious in the wild-type strain.

Fig. 6
figure 6

Growth curves of the mutant F-23 and wild-type strains in 5-L fermenters. 80 g L− 1 glucose was supplemented to the medium once a day from the first day. Red represents the mutant F-23 strain, and black represents the wild-type strain

Full size image

The total lipid and ARA yields almost synchronously accumulated with mycelial growth. After 10 d of fermentation, the lipid yield of mutant F-23 reached a maximum of 10.93 g L− 1, 1.55 times of that of wild-type strain SD003 (7.06 g L− 1). Meanwhile, the ARA yield of mutant F-23 was 5.46 g L− 1, 2.22 times of that of strain SD003 (2.45 g L− 1). These results indicate that mutant F-23 could be a valuable candidate strain for producing ARA.

Discussion

Due to the lack of markers and low transformation frequencies, there are still some technical problems in the simultaneous transformation of several genes of M. alpina by molecular methods. The mutagenesis breeding method is still an effective breeding method, because it could change many characteristics without requiring much biochemical and genetic information of the strain. In this study, heavy ion beam irradiation mutagenesis combined with directional screening was carried out and greatly improved the work efficiency. This is the first report about applying heavy-ion irradiation mutagenesis on M. alpina breeding.

So far, researchers have carried out a variety of ways to mutagenize on M. alpina, such as UV, γ- and χ-rays, etc. [33]. Compared with the traditional physical mutagenesis (e.g., UV, γ- and χ-rays), heavy ion beam irradiation mutagenesis has higher LET (the energy transferred per unit length) that can induce more biological damage than other types of radiation, which is difficult to repair. Therefore, mutations caused by heavy ion mutagenesis are relatively stable [34]. The LET value of the heavy beam used in this study is 31 keV μm− 1, while the LET values of the χ-ray and γ-ray are only 0.2 and 2.0 keV μm− 1 respectively [35]. On the other hand, the heavy ion ionization peak (Bragg peak) is sharper. Thus, the interaction area between the heavy ion beam and the biological sample is more concentrated, which results in a higher mutation rate [36]. Therefore, heavy ion mutagenesis can be used for M. alpina as a more efficient breeding method.

Usually, a lot of works are needed during the mutants screening. So, in order to reduce the workload, this study attempts to establish a rapid pre-screening method. Triclosan has been used in some studies on lipid accumulation [12], but whether triclosan could improve ARA production is not clear. From our results, using the triclosan screening method, twenty strains screened from all the 53 mutants had an ARA content increasing by at least 30%, with the highest ARA content of mutant Z-44 increased nearly 40%. The positive mutation rate is 38%, which is higher than other methods and greatly improves the work efficiency. These results indicated that the method using heavy ion mutagenesis combined with triclosan screening was an effective method for improving ARA production of M. alpina.

In order to investigate the effect of triclosan on lipid and ARA synthesis, we used qRT-PCR to investigate the mRNA expression levels of desaturase and fatty acid synthase (FAS) in M. alpina. The results showed that the mRNA expression level of FAS in mutant Z-44 was significantly increased (4.4 times), indicating that triclosan strongly affected the FAS activity, and the selected mutant had strong FAS activity (Fig. 5). This is also consistent with the fatty acid composition of Z-44 in Table 3. The contents of palmitic acid (C16:0) in mutant Z-44 were significantly decreased, and the proportion of stearic acid (C18:0) in the total fatty acids is still high. This phenomenon may cause by the increase of FAS activity and the low expression levels of the four desaturases, especially the low expression of Δ9-, Δ12-desaturase, which still blocked the ARA biosynthesis (Figs. 1 and 5). Therefore, the enhancement of desaturase expressions or activities were selected as the second round screening strategy.

According to the previous report, octyl gallate can strongly inhibit the activity of Δ5- and Δ6- desaturase of M. alpina [37], so we decided to use it as the screening agent. The results of qRT-PCR showed that the mRNA expression levels of all the desaturases of mutant F-23 were improved, especially the expression levels of Δ9- and Δ6-desaturases, which suggested that the main action sites of octyl gallate may be the Δ6- and Δ9- desaturase. These results suggested that octyl gallate can inhibit the activity of not only Δ5- and Δ6-desaturases, but also the other desaturases, especially Δ9-desaturase (Fig. 1). In addition, compared with the Z-44 mutant, the content of C18: 0 and C18: 2 in mutant F-23 were decreased significantly. In particular, the content of 18:0 decreased from 22.35% to 13.95%, with a drop of 37.58%. This may be due to the activity increase of the Δ9-, Δ6- desaturase, which increases the flux of ARA biosynthesis, thereby further increasing the ARA content (from 38.37% to 49.12%).

Our results showed that compared with the wild type, the lipid and ARA yield of mutant F-23 were obviously increased 1.33 and 3.24 times, respectively. The genetic trait of mutant F-23 was stable during 10 passages. Based on our results, the ARA yield will be further improved, if we next carry out the fermentation optimization and the genetic transformation methods, such as the overexpression of VHb, ME and other genes [38,39,40,41]. In general, our study provides a good method and strategy for screening microorganisms with high yield of unsaturated fatty acids.

Conclusions

In conclusions, the improvement of the industrial strain was an effective way to reduce the ARA production costs. In this study, mutant F-23 was selected after heavy ion beam irradiation combined with triclosan and octyl gallate treatment. Compared with the wild-type strain, the total lipid and ARA yields were increased by 1.33 and 3.24 times, respectively. These results provide a good method and strategy for screening microorganisms with high yield of unsaturated fatty acids.

Abbreviations

5-FU:

5-fluorouracil

ARA:

arachidonic acid

CGMCC:

China General Microbiological Culture Collection Center

DGLA:

dihomo-γ-linolenic acid

FAMEs:

fatty acid methyl esters

FAS:

fatty acid synthase

FID:

flame ionization detector

GLA:

γ-linolenic acid

GY:

screening medium

HIRFL:

Heavy Ion Research Facility in Lanzhou

LA:

linoleic acid

LET:

the energy transferred per unit length

M. alpina :

Mortierella alpina

ME:

malic acid

PDA:

potato dextrose agar medium

VHb:

Vitreoscilla hemoglobin

References

  1. Ji XJ, Ren LJ, Nie ZK, Huang H, Ouyang PK. Fungal arachidonic acid-rich oil: research, development and industrialization. Crit Rev Biotechnol. 2014;34(3):197–214.

    Article  CAS  Google Scholar 

  2. Zhang AH, Ji XJ, Wu WJ, Ren LJ, Yu YD, Huang H. Lipid fraction and intracellular metabolite analysis reveal the mechanism of arachidonic acid-rich oil accumulation in the aging process of Mortierella alpina. J Agric Food Chem. 2015;63(44):9812–9.

    Article  CAS  Google Scholar 

  3. Kenichi Higashiyama SF, Enoch Y. Park, Sakayu Shimizu. Production of arachidonic acid by Mortierella Fungi. Biotechnol Bioprocess Eng. 2002;7:252–62.

    Article  Google Scholar 

  4. Nie ZK, Deng ZT, Zhang AH, Ji XJ, Huang H. Efficient arachidonic acid-rich oil production by Mortierella alpina through a three-stage fermentation strategy. Bioprocess Biosyst Eng. 2014;37(3):505–11.

    Article  CAS  Google Scholar 

  5. Li X, Lin Y, Chang M, Jin Q, Wang X. Efficient production of arachidonic acid by Mortierella alpina through integrating fed-batch culture with a two-stage pH control strategy. BioresourTechnol. 2015;181:275–82.

    Article  CAS  Google Scholar 

  6. Kikukawa H, Sakuradani E, Ando A, Okuda T, Ochiai M, Shimizu S, Ogawa J. Disruption of lig4 improves gene targeting efficiency in the oleaginous fungus Mortierella alpina 1S-4. J Biotechnol. 2015;208:63–9.

    Article  CAS  Google Scholar 

  7. Ando A, Sakuradani E, Horinaka K, Ogawa J, Shimizu S. Transformation of an oleaginous zygomycete Mortierella alpina 1S-4 with the carboxin resistance gene conferred by mutation of the iron-sulfur subunit of succinate dehydrogenase. Curr Genet. 2009;55(3):349–56.

    Article  CAS  Google Scholar 

  8. Takeno S, Sakuradani E, Tomi A, Inohara-Ochiai M, Kawashima H, Shimizu S. Transformation of oil-producing fungus, Mortierella alpina 1S-4, using Zeocin, and application to arachidonic acid production. J Biosci Bioeng. 2005;100(6):617–22.

    Article  CAS  Google Scholar 

  9. Sakuradani E. Advances in the production of various polyunsaturated fatty acids through oleaginous fungus Mortierella alpina breeding. Biosci Biotechnol Biochem. 2010;74(5):908–17.

    Article  CAS  Google Scholar 

  10. Liang MH, Jiang JG. Advancing oleaginous microorganisms to produce lipid via metabolic engineering technology. Prog Lipid Res. 2013;52(4):395–408.

    Article  CAS  Google Scholar 

  11. Li Z, Chen X, Li Z, Li D, Wang Y, Gao H, Cao L, Hou Y, Li S, Liang J. Strain improvement of Trichoderma viride for increased cellulase production by irradiation of electron and 12C6+-ion beams. Biotechnol Lett. 2016;38(6):983–9.

    Article  CAS  Google Scholar 

  12. Cheng YR, Sun ZJ, Cui GZ, Song XJ, Cui Q. A new strategy for strain improvement of Aurantiochytrium sp. based on heavy-ions mutagenesis and synergistic effects of cold stress and inhibitors of enoyl-ACP reductase. Enzyme Microb Tech. 2016;93-94:182–90.

    Article  CAS  Google Scholar 

  13. Yang S, Wang SY, Jiang BL, Zhou X, Chen JH, Li WJ, Liu J, Hu W, Xiao GQ, Dong MY, et al. Study of a high-yield Cellulase system created by heavy-ion irradiation-induced mutagenesis of Aspergillus niger and mixed fermentation with Trichoderma reesei. PLoS One. 2015;10(12):e0144233.

    Article  Google Scholar 

  14. Williams K, Sobol RW. Mutation research/fundamental and molecular mechanisms of mutagenesis special issue: DNA repair and genetic instability. Mutat Res-Fund Mol M. 2013;743:1–3.

    Article  Google Scholar 

  15. Baba M, Kikuta F, Suzuki I, Watanabe MM, Shiraiwa Y. Wavelength specificity ofgrowth, photosynthesis, and hydrocarbon production in the oil-producing green alga Botryococcusbraunii. BioresourTechnol. 2012;109:266–70.

    Article  CAS  Google Scholar 

  16. Przybyła T, Sakowicz-Burkiewicz M, Maciejewska I, Bielarczyk H, Pawełczyk T. Suppression of ID1 expression in colon cancer cells increases sensitivity to 5-fluorouracil. Acta Biochim Pol. 2017;64(2):315–22.

    Article  Google Scholar 

  17. Anderson NM, Berberovic Z, Berndl E, Bailey ML, Flenniken AM, Osborne LR, Adamson SL, Rossant J, Wang C, Minden MD, et al. Cytopenia induction by 5-fluorouracil identifies thrombopoietic mutants in sensitized ENU mutagenesis screens. Exp Hematol. 2012;40(1):48–60.

    Article  CAS  Google Scholar 

  18. Wang L, Chen W, Feng Y, Ren Y, Gu ZN, Chen HQ, Wang HC, Thomas MJ, Zhang BX, Berquin IM, et al. Genome characterization of the oleaginous fungus Mortierella alpina. PLoS One. 2011;6(12):e28319. https://0-doi-org.brum.beds.ac.uk/10.1371/journal.pone.0028319.

  19. Vongsangnak W, Ruenwai R, Tang X, Hu X, Zhang H, Shen B, Song Y, Laoteng K. Genome-scale analysis of the metabolic networks of oleaginous Zygomycete fungi. Gene. 2013;521(1):180–90.

    Article  CAS  Google Scholar 

  20. Twanabasu BR, Stevens KJ, Venables BJ. The effects of triclosan on spore germination and hyphal growth of the arbuscular mycorrhizal fungus Glomus intraradices. Sci Total Environ. 2013;454:51–60.

    Article  Google Scholar 

  21. Wang Q, Zhang Y, Li H. Octyl gallate: an antioxidant demonstrating selective and sensitive fluorescent property. Food Chem. 2017;219:268–73.

    Article  CAS  Google Scholar 

  22. Lakshmana MK, Zhang S-Q, Sawmiller D, Li S, Rezai-Zadeh K, Hou H, Zhou S, Shytle D, Giunta B, Fernandez F, et al. Octyl Gallate markedly promotes anti-Amyloidogenic processing of APP through estrogen receptor-mediated ADAM10 activation. PLoS One. 2013;8(8):e71913.

    Article  Google Scholar 

  23. Törmäkangas L, Vuorela P, Saario E, Leinonen M, Saikku P, Vuorela H. In vivo treatment of acute chlamydia pneumoniae infection with the flavonoids quercetin and luteolin and an alkyl gallate, octyl gallate, in a mouse model. Biochem Pharmacol. 2005;70(8):1222–30.

    Article  Google Scholar 

  24. Hsu F, Chang H, Chang S. Evaluation of antifungal properties of octyl gallate and its synergy with cinnamaldehyde. Bioresour Technol. 2007;98(4):734–8.

    Article  CAS  Google Scholar 

  25. Fujita K, Kubo I. Antifungal activity of octylgallate. Int J Food Microbiol. 2002;79:193–201.

    Article  CAS  Google Scholar 

  26. Gao M, Song X, Feng Y, Li W, Cui Q. Isolation and characterization of Aurantiochytrium species: high docosahexaenoic acid (DHA) production by the newly isolated microalga, Aurantiochytrium sp. SD116. J Oleo Sci. 2013;62(3):143–51.

    Article  CAS  Google Scholar 

  27. Lukens L, Fitzgerald TL, Powell JJ, Stiller J, Weese TL, Abe T, Zhao G, Jia J, CL MI, Li Z, et al. An assessment of heavy ion irradiation mutagenesis for reverse genetics in wheat (Triticum aestivum L.). PLoS One. 2015;10(2):e0117369.

    Article  Google Scholar 

  28. Shi J, Lu W, Sun Y. Comparison of space flight and heavy ion radiation induced genomic/epigenomic mutations in rice (Oryza sativa). Life Sci Space Res. 2014;1:74–9.

    Article  Google Scholar 

  29. Wang SY, Bo YH, Zhou X, Chen JH, Li WJ, Liang JP, Xiao GQ, Wang YC, Liu J, Hu W, et al. Significance of heavy-ion beam irradiation-induced Avermectin B1a production by engineered Streptomyces avermitilis. Biomed Res Int. 2017;2017:1–13.

    Google Scholar 

  30. Li X, Liu R, Li J, Chang M, Liu Y, Jin Q, Wang X. Enhanced arachidonic acid production from Mortierella alpina combining atmospheric and room temperature plasma (ARTP) and diethyl sulfate treatments. BioresourTechnol. 2015;177:134–40.

    Article  CAS  Google Scholar 

  31. Butler E, Whelan MJ, Ritz K, Sakrabani R, van Egmond R. The effect of triclosan on microbial community structure in three soils. Chemosphere. 2012;89(1):1–9.

    Article  CAS  Google Scholar 

  32. Heath RJ, White SW, Rock CO. Inhibitors of fatty acid synthesis as antimicrobial chemotherapeutics. Appl Microbiol Biotechnol. 2002;58(6):695–703.

    Article  CAS  Google Scholar 

  33. Cong LL, Ji XJ, Nie ZK, Peng C, Li ZY, Deng ZT, Huang H. Breeding of Mortierella alpina for high-yield arachidonic acid-rich oil production. Chinese Journal of Bioprocess Engineering. 2012;10(5):34–8.

    CAS  Google Scholar 

  34. Sage E, Shikazono N. Radiation-induced clustered DNA lesions: repair and mutagenesis. Free Radical Bio Med. 2017;107:125–35.

    Article  CAS  Google Scholar 

  35. Ma Y, Wang Z, Zhu M, Yu C, Cao Y, Zhang D, Zhou G. Increased lipid productivity and TAG content in Nannochloropsis by heavy-ion irradiation mutagenesis. Bioresour Technol. 2013;136:360–7.

    Article  CAS  Google Scholar 

  36. Boreyko AV, Krasavin EA. Mutagenic effect of accelerated heavy ions on bacterial cells. PhysPartNuclei. 2011;42(6):998–1024.

    CAS  Google Scholar 

  37. Kawashima H, Akimoto K, Shirasaka N. Inhibitory effects of alkyl gallate and its derivatives on fatty acid desaturation. Biochim Biophy Acta. 1996;1299(1):34–8.

    Article  Google Scholar 

  38. Zhang H, Feng Y, Cui Q, Song X. Expression of Vitreoscilla hemoglobin enhances production of arachidonic acid and lipids in Mortierella alpina. BMC Biotechnol. 2017;17(1):68.

    Article  Google Scholar 

  39. Hao G, Chen H, Du K, Huang X, Song Y, Gu Z, Wang L, Zhang H, Chen W, Chen YQ. Increased fatty acid unsaturation and production of arachidonic acid by homologous over-expression of the mitochondrial malic enzyme in Mortierella alpina. Biotechnol Lett. 2014;36(9):1827–34.

    Article  CAS  Google Scholar 

  40. Ji XJ, Zhang AH, Nie ZK, Wu WJ, Ren LJ, Huang H. Efficient arachidonic acid-rich oil production by Mortierella alpina through a repeated fed-batch fermentation strategy. Bioresour Technol. 2014;170:356–60.

    Article  CAS  Google Scholar 

  41. Nie ZK, Ji XJ, Shang JS, Zhang AH, Ren LJ, Huang H. Arachidonic acid-rich oil production by Mortierella alpina with different gas distributors. Bioprocess biosysteng. 2014;37(6):1127–32.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We are very grateful to Dr. Dong Lu, Jie Wang and Xin Li from the Institute of Modern Physics at the Chinese Academy of Sciences for their help with the heavy ion beam irradiation mutagenesis experiments.

Funding

This work is financially supported by the National Key Research and Development Program (no. 2016YFA0601400), Key research and development program of Shandong Province (no. 2017YYSP026), Qingdao independent innovation major project (16–7–1-11-zdzx-nsh). This study is a contribution to the international IMBER project. The project was supported by Shandong Provincial Key Laboratory of Energy Genetics.

Availability of data and materials

All data generated or analyzed during this study are included in this published article.

Author information

Authors and Affiliations

  1. Shandong Provincial Key Laboratory of Energy Genetics, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, 266101, Shandong, China

    Huidan Zhang, Yingang Feng, Qiu Cui & Xiaojin Song

  2. Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, 730000, Gansu, China

    Dong Lu & Xin Li

  3. Key Laboratory of Biofuels, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, 266101, Shandong, China

    Qiu Cui

  4. Qingdao Engineering Laboratory of Single Cell Oil, Qingdao, 266101, Shandong, China

    Huidan Zhang, Yingang Feng, Qiu Cui & Xiaojin Song

  5. University of Chinese Academy of Sciences, Beijing, 100049, China

    Huidan Zhang

Authors
  1. Huidan Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Dong Lu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xin Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yingang Feng
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Qiu Cui
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Xiaojin Song
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

HZ performed the experiments as part of her doctoral work. All this work was carried out under the supervision of QC and XS. DL and XL performed the heavy ion beam irradiation experiments. XS assisted in the bioreactor experiment. QC and YF also assisted in editing the manuscript. All the authors have read and approved the final manuscript.

Corresponding author

Correspondence to Xiaojin Song.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, H., Lu, D., Li, X. et al. Heavy ion mutagenesis combined with triclosan screening provides a new strategy for improving the arachidonic acid yield in Mortierella alpina. BMC Biotechnol 18, 23 (2018). https://0-doi-org.brum.beds.ac.uk/10.1186/s12896-018-0437-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s12896-018-0437-y

Keywords

BMC Biotechnology

ISSN: 1472-6750

Contact us