Skip to main content
  • Research article
  • Open access
  • Published:

A novel MVA-mediated pathway for isoprene production in engineered E. coli

Abstract

Background

To deal with the increasingly severe energy crisis and environmental consequences, biofuels and biochemicals generated from renewable resources could serve as a promising alternative for replacing petroleum as a source of fuel and chemicals, among which isoprene (2-methyl-1,3-butadiene) in particular is of great significance in that it is an important platform chemical, which has been used in industrial production of synthetic rubber for tires and coatings or aviation fuel.

Results

We firstly introduced fatty acid decarboxylase (OleTJE) from Jeotgalicoccus species into E. coli to directly convert MVA(mevalonate) into 3-methy-3-buten-1-ol. And then to transform 3-methy-3-buten-1-ol to isoprene, oleate hydratase (OhyAEM) from Elizabethkingia meningoseptica was overexpressed in E. coli. A novel biosynthetic pathway of isoprene in E. coli was established by co-expressing the heterologous mvaE gene encoding acetyl-CoA acetyltransferase/HMG-CoA reductase and mvaS gene encoding HMG-CoA synthase from Enterococcus faecalis, fatty acid decarboxylase (OleTJE) and oleate hydratase (OhyAEM). Furthermore, to enhance isoprene production, a further optimization of expression level of OleTJE, OhyAEM was carried out by using different promoters and copy numbers of plasmids. Thereafter, the fermentation process was also optimized to improve the production of isoprene. The final engineered strain, YJM33, bearing the innovative biosynthetic pathway of isoprene, was found to produce isoprene up to 2.2 mg/L and 620 mg/L under flask and fed-batch fermentation conditions, respectively.

Conclusions

In this study, by using metabolic engineering techniques, the novel MVA-mediated biosynthetic pathway of isoprene was successfully assembled in E. coli BL21(DE3) with the heterologous MVA upper pathway, OleTJE from Jeotgalicoccus species and OhyAEM from Elizabethkingia meningoseptica. Compared with traditional MVA pathway, the novel pathway is shortened by 3 steps. In addition, this is the first report on the reaction of converting MVA into 3-methy-3-buten-1-ol by fatty acid decarboxylase (OleTJE) from Jeotgalicoccus species. In brief, this study provided an alternative method for isoprene biosynthesis, which is largely different from the well-developed MEP pathway or MVA pathway.

Background

To address an increasingly severe energy crisis and its environmental consequences, biofuels and biochemicals generated from renewable resources, as a source of fossil fuels and chemicals, could serve as promising alternatives for petroleum [1, 2]. Isoprene becomes increasingly important as a vital platform chemical for the production of synthetic rubber [3] and aviation fuel [4].

So far, dimethylallyl diphosphate, the precursor of isoprene can be produced mainly through two different pathways, the methylerythritol 4-phosphate (MEP) pathway and mevalonate (MVA) pathway [5], which have already been adopted by different research groups for the biosynthesis of isoprene in E. coli [610]. The data show that MVA pathway is more effective in the isoprene production than the MEP pathway because of the regulatory mechanisms for the MEP pathway present in the native host [11].

Isoprene biosynthesis using the MVA pathway requires eight reactions that are catalyzed by seven or eight enzymes encoded by two operons. One operon consists of the genes ERG10, ERG13 and tHMGR from Saccharomyces cerevisiae or mvaE and mvaS from Enterococcus faecalis. This operon catalyzes the formation of MVA from acetyl-CoA and is referred to as the ‘upper’ pathway. The other operon is composed of ERG8, ERG12, ERG9, and IDI1. This operon converts MVA to DMAPP and is called the ‘lower’ pathway. DMAPP is further converted to isoprene by isoprene synthase from Populus alba (IspS). Although much success has been achieved regarding isoprene biosynthesis, many problems remain to be solved, such as the intermediate imbalance resulting from heterologous over-expression of so many non-native genes in the host [12]. To overcome these hurdles, one approach is to employ a chromosome integration method to reduce the burden of cell growth resulting from the over-expression of heterologous genes [13, 14].

Recent advances in synthetic biology and metabolic engineering have made it possible to construct a new pathway to replace the native pathway by optimizing and assembling different sources of the enzymes. For example, Liao used an evolving citramalate synthase (CimA) from Methanococcus jannaschii to devise an innovative pathway that directly converted pyruvate to 2-ketobutyrate and avoided threonine biosynthesis. This constructed pathway is the simplest keto acid-mediated pathway for the biosynthesis of 1-propanol and 1-butanol generated from glucose [15]. Atsumi employed a strategy using the host’s highly active amino acid biosynthetic pathway to synhthesize 2-keto acid intermediates which were further transformed into higher alcohols by 2-keto-acid decarboxylases (KDCs) and alcohol dehydrogenases (ADHs) [16]. In this strategy, by adjusting the intermediates from amino acid biosynthesis pathways to alcohol production, biofuels were produced through two final unnatural steps.

In this paper, we designed an innovative biosynthetic route for isoprene production by assembling the MVA upper pathway from Enterococcus faecalis, the fatty acid decarboxylase (OleTJE) from Jeotgalicoccus sp. ATCC 8456 and the oleate hydratase (OhyAEM) from Elizabethkingia meningoseptica into a new pathway in E. coli (Fig. 1). This new pathway is of great importance for several reasons. First, fatty acid decarboxylase (OleTJE) was shown for the first time to catalyze the transition of MVA to 3-methyl-3-buten-1-ol. Furthermore, compared with the traditional MVA pathway, this novel pathway has been shortened by 3 steps. It represents the shortest MVA-mediated pathway for the production of isoprene from glucose. In summary, this paper develops a distinctive synthetic route to isoprene production that differs from the well-developed MEP pathway and MVA pathway by a large degree.

Fig. 1
figure 1

Production of isoprene via the novel MVA-mediated pathway used in this study. The dashed box shows the traditional pathway for MVA conversion to isoprene [8, 9], while the new pathway constructed in this study is within the solid-lined box. Enzyme symbols: MvaE (acetyl-CoA acetyltransferase/HMG-CoA reductase) and MvaS (HMG-CoA synthase) from Enterococcus faecalis; ERG12 (mevalonate kinase), ERG8 (phosphomevalonate kinase), ERG19 (mevalonate pyrophosphate decarboxylase) and IDI1 (IPP isomerase) from Saccharomyces cerevisiae; IspS (isoprene synthase) from Populus alba. OleTJE from Jeotgalicoccus species; OhyAEM from Elizabethkingia meningoseptica. Pathway intermediates: A-CoA, acetyl-CoA; AA-CoA, acetoacetyl-CoA; HMG-CoA, hydroxymethylglutaryl-CoA; Mev-P, mevalonate 5-phosphate; Mev-PP, mevalonate pyrophosphate. IPP, isopentenyl pyrophosphate; DMAPP, dimethylallyl pyrophosphate

Results and discussion

Overexpression and functional analysis of OleTJE

The function of the fatty acid decarboxylase (OleTJE) from Jeotgalicoccus sp. ATCC 8456 to decarboxylate long-chain fatty acids into their corresponding terminal olefins has been previously demonstrated [17]. In this study, we determined whether OleTJE could directly catalyze the MVA decarboxylation reaction. The nucleotide sequence of the fatty acid decarboxylase (OleTJE) generated from Jeotgalicoccus sp. ATCC 8456 was introduced into the plasmid pCOLADUet-1. The recombinant OleTJE protein carrying a N-terminal six-histidine tag was purified from E. coli, and identified by SDS-PAGE (Fig. 2b). The enzyme activity was measured in a gas chromatography vial and a 3-methyl-3-buten-1-ol specific peak was detected by GC-MS (Fig. 2a). No detectable 3-methyl-3-buten-1-ol was formed when the purified enzyme or MVA was omitted from the assay. These results indicated that the isolated recombinant protein possessed MVA decarboxylase activity and was able to convert MVA to 3-methyl-3-buten-1-ol. To our knowledge, this reaction has not been previously documented.

Fig. 2
figure 2

Enzymatic assay for 3-methyl-3-buten-1-ol production by OleTJE using GC-MS and SDS-PAGE analysis. a GC-MS analysis of a 3-methyl-3-buten-1-ol sample produced by the OleTJE assay mixtures. b SDS-PAGE analysis of OleTJE. CK: cell lysate from BL21(DE3) containing pCOLADuet-1. 1: crude cell extracts from YJM30. 2: purified OleTJE

In the native MVA pathway, MVA is phosphorylated twice and decarboxylated to form IPP. This process requires three enzymes, including mevalonate kinase, phosphomevalonate kinase and mevalonate diphosphate decarboxylase [18]. Then, using the enzyme pyrophosphatase or phosphatase, IPP can be converted into 3-methyl-3-buten-1-ol by removing the pyrophosphates [19]. To shorten the reaction steps of this pathway, we selected the enzyme fatty acid decarboxylase (OleTJE) from Jeotgalicoccus species, which has the ability to directly decarboxylate MVA into 3-methyl-3-buten-1-ol using only one step. The experimental results showed that the reaction catalyzed by the OleTJE enzyme shortened the pathway and was able to convert MVA to 3-methyl-3-buten-1-ol in only one step without phosphorylation. To our knowledge, this is the first report of the above-mentioned reaction.

Overexpression and functional analysis of OhyAEM

The capacity for cells containing oleate hydratase to transform oleic acid (OA) into 10-hydroxystearic acid (10-HSA) was first characterized by Wallen et al. in Pseudomonas sp. strain 3266 in 1962 [20]. Niehaus then showed that the reaction was reversible [21]. However, only in recent years was the gene encoding oleate hydratase in Elizabethkingia meningoseptica (formerly Pseudomonas sp.) cloned and expressed in E. coli [22]. Marliere demonstrated that oleate hydratase has the ability to catalyze the dehydration of isobutanol to form isobutene [23].

According to the above-referenced studies, the enzyme oleate hydratase can dehydrate 3-methyl-3-buten-1-ol into isoprene. In our study, the nucleotide sequence of the ohyA EM gene from Elizabethkingia meningoseptica was altered based on the preferred codon usage of E. coli and subsequently cloned into the vector pCOLADUet-1. The protein was expressed in E. coli BL21 (DE3) and purified using a nickel-affinity chromatography column. The band of the recombinant protein was observable on coomassie-stained SDS-PAGE gel of the crude cell extracts (Fig. 3b). The enzyme assay was conducted in a gas chromatography vial with GC-MS being used to verify an isoprene-specific peak (Fig. 3a). No detectable isoprene was produced when the purified enzyme or 3-methyl-3-buten-1-ol was omitted from the assay. The results suggested that the enzyme OhyAEM from Elizabethkingia meningoseptica is capable of catalyzing the dehydroxylation of 3-methyl-3-buten-1-ol into isoprene.

Fig. 3
figure 3

Enzymatic assay for isoprene production by OhyAEM using GC-MS and SDS-PAGE analysis. a GC-MS analysis of a isoprene sample produced by the OhyAEM assay mixtures. b SDS-PAGE analysis of OhyAEM. CK: cell lysate from BL21(DE3) containing pCOLADuet-1. 1: crude cell extracts from YJM31. 2: purified OhyAEM

Establishing a novel biosynthetic pathway for isoprene in engineered E. coli

In previous experiments, the engineered strain YJM16 containing the efficient MVA upper pathway from Enterococcus faecalis was constructed, resulting in the accumulation of up to 1.31 g/L of MVA under flask culture conditions [9]. To subsequently obtain isoprene from glucose, we transformed the plasmid pYJM34 carrying the oleT JE gene from Jeotgalicoccus species and ohyA EM gene from Elizabethkingia meningoseptica into strain YJM16 harboring the MVA upper pathway. The resulting engineered strain YJM32 was inoculated in 50 ml fermentation medium and cultured at 37 °C which was further cultivated at 30 °C for 36 h with 0.5 mM IPTG addition into the broth when the OD600 attained about 0.6. The isoprene production by the strain YJM32 reached 17.6 μg/L. While the control engineered strain YJM35 only harboring upper MVA pathway and the fatty acid decarboxylase (OleTJE) cannot generate the isoprene. The results proved that a novel biosynthetic pathway for isoprene production containing the MVA upper pathway from Enterococcus faecalis, the oleT JE gene from Jeotgalicoccus species and ohyA EM gene from Elizabethkingia meningoseptica had been successfully constructed in E. coli.

In the previous studies, several research groups, including ours, established pathways for the conversion of MVA to isoprene. This process typically requires five reactions, including a two-step phosphorylation catalyzed by mevalonate kinase and phosphomevalonate kinase, a one-step decarboxylation catalyzed by mevalonate 5-diphosphate decarboxylase, a one-step isomerization catalyzed by IPP isomerase and a one-step dephosphorylation catalyzed by isoprene synthase [7, 9, 24]. This study is the first to use only two-step reactions to construct a new pathway for the conversion of MVA to isoprene by combining the oleT JE gene from Jeotgalicoccus species and ohyA EM gene from Elizabethkingia meningoseptica. Accordingly, from the starting acetyl-CoA to the final product isoprene, the entire pathway containing eight reactions was shortened to five reactions. The result is a promising step in the novel MVA-mediated biosynthetic pathway for isoprene production.

Optimization of a biosynthetic pathway for isoprene production

To further enhance isoprene production, the expression levels of the oleT JE gene from Jeotgalicoccus species and the ohyA EM gene from Elizabethkingia meningoseptica were optimized by using different plasmid vectors containing different copy numbers and promoters. As is shown in Fig. 4, there achieved more isoprene production of the oleT JE gene and ohyA EM gene when under the control of the T7 promoter (YJM32) than that of the araBAD promoter (YJM34). The highest isoprene production (52.2 μg/L) was found in the strain YJM33 harboring a high copy number plasmid, which was three-fold greater than the production of isoprene by YJM32 using lower copy number plasmids.

Fig. 4
figure 4

Optimization of the expression levels of oleT JE and ohyA EM . The expression of oleT JE aand ohyA EM under the control of T7 promoter (YJM32) achieved much higher isoprene production than when the gene were under the control of the araBAD promoter (YJM34). The strain YJM33 using a high copy number plasmid (pET-28a(+)) achieved the highest isoprene production (52.2 μg/L). The experiment was conducted in triplicate

Enhance isoprene production through optimizing the culture conditions

In our work, the “one-factor at-a-time” optimization strategy (Additional file 1: Fig. S1) was applied to augment isoprene productivity by optimizing the organic nitrogen source, induction temperature and IPTG concentration respectively. The results showed that the highest isoprene yield (2.2 mg/L) was obtained when the YJM33 strain was cultured in fermentation medium containing 20 g/L glucose as a carbon source, 9 g/L beef powder as an organic nitrogen source and induced with 0.25 mM IPTG at 31 °C whose combined optimization effect could contribute to an approximately 42-fold increase in isoprene production.

Microbial isoprene production using the novel biosynthetic pathway

To assess the isoprene biosynthesis in a scalable process using the engineered strain YJM33 with the novel biosynthetic pathway encoded on the plasmids pYJM16 (pACY-mvaE-mvaS) and pYJM35 (pET28-OleT JE -OhyA EM ), the fermentation of YJM33 under fed-batch condition was conducted on a 5-L scale. At an OD600 of ~12, 0.25 mM IPTG was put into the broth to induce the heterologous genes of the pathway for expression. After depleting the glucose initially present in the media, glucose solution (800 g l−1) was added to the cultures, and the residual glucose was restrained below 0.5 g/l to reduce acetate production. The OD600 at the end of the fermentation was ~36. As is shown in Fig. 5, isoprene gradually accumulated over the course of the fermentation and amounted to 620 mg/L with a productivity of 6.46 mg/L/h within 32 h (Fig. 5). In addition, isoprene production rose dramatically from 4 h to 16 h after being induced, and the productivity of isoprene attained 8.76 mg/L/h.

Fig. 5
figure 5

The time course of isoprene production by YJM33. Cell growth (▲) and isoprene accumulation (■) in YJM33. Cells were induced when the OD600 reached approximately 12 at 31 °C. Other experimental conditions are described in the section entitled “Fed-Batch Fermentation”

Although much progress has been made regarding the novel biosynthetic pathway of isoprene in E. coli, the present productivity remains too low and it is economically unfeasible for large scale production. The reason for the low yield could be the low catalytic activity of the enzymes OleTJE and OhyAEM. Future studies should focus on enhancing the efficiency of the novel pathway using the following approaches: (1) The structures of both enzymes should be elucidated. Based on the structural data, it may be possible to enhance the catalytic efficiency by mutating key amino acids in the binding sites and catalytic active sites [25, 26] or to increase enzyme expression level by optimizing the Shine-Dalgarno sequence of enzyme [27]. (2) The pathway might be dynamically regulated using the dynamic sensor-regulator system (DSRS) developed by Keasling to bio-synthesize fatty acid-based products in E. coli [28]. The DSRS utilizes a transcription factor which can sense a crucial intermediate and dynamically regulate the expression level of genes related to target product synthesis. Consequently, if the natural sensor for crucial intermediate of MVA can be found, we can develop a DSRS for isoprene production to equilibrate metabolic pathway, thus enhancing product concentration, conversion efficiency and host’s genetic stability.

Conclusions

In this paper, isoprene was synthesized through a distinctive biosynthetic pathway harboring the MVA upper pathway from Enterococcus faecalis, the oleT JE gene from Jeotgalicoccus species and the ohyA EM gene from Elizabethkingia meningoseptica in an engineered E. coli strain. The most optimized strain, YJM33, bearing the novel MVA-mediated biosynthetic pathway of isoprene, accumulated isoprene up to 2.2 mg/L and 620 mg/L under conditions of flask fermentation and fed-batch fermentation, respectively. Despite the relatively low level of isoprene production by this novel pathway, we have reduced the complexity of the native isoprene pathway by introducing two novel enzymes to catalyze the formation of isoprene from mevalonate in only 2 steps instead of 5.

To our knowledge, this is the first report of the conversion of MVA into 3-methyl-3-buten-1-ol by fatty acid decarboxylase (OleTJE) from Jeotgalicoccus species, and it is also the first to describe the catalysis of MVA to isoprene with simultaneous heterologous expression of the oleT JE gene from Jeotgalicoccus species and the ohyA EM gene from Elizabethkingia meningoseptica. Therefore, this study supplies an unusual synthetic route for bio-isoprene production that is very different from the well-characterized MEP pathway or MVA pathway.

Methods

Strains, plasmids and culture conditions

The strains and plasmids used in the present study are listed in Table 1. All of genes were expressed in E. coli BL21(DE3) to prepare the enzyme sample and biosynthesize the product. E. coli strains were grown in LB medium. For isoprene production, the different engineered strains were incubated in a shake-flask or under fed-batch fermentation conditions including defined medium consisted of 20 g/L glucose or 20 g/L glycerol, 0.3 g/L ferric ammonium citrate, 9.8 g/L K2HPO4, 9 g/L beef extract, 2.1 g/L citric acid monohydrate, 0.06 g/L MgSO4 and 1 ml of trace element solution which contained 0.29 g/L ZnSO4 · 7H2O, 0.37 g/L (NH4)6Mo7O24 · 4H2O, 0.25 g/L CuSO4 · 5H2O, 1.58 g/L MnCl2 · 4H2O and 2.47 g/L H3BO4. The strains fed on glycerol as a carbon source to produce isoprene when containing the plasmid of the araBAD promoter; strains without this plasmid were fed with glucose. Meanwhile, suitable antibiotics were added to the culture broth with the following concentrations: ampicillin (100 μg/ml), kanamycin (50 μg/ml), and chloramphenicol (34 μg/ml).

Table 1 Strains , plasmids used in this study

Plasmid construction

To improve the expression level of heterologous genes in E. coli, the nucleotide sequences of terminal olefin-forming fatty acid decarboxylase (OleTJE) gene (GenBank No. HQ709266.1) from Jeotgalicoccus sp. ATCC 8456 and the oleate hydratase (OhyAEM) gene (GenBank No. ACT54545.1) from Elizabethkingia meningoseptica were firstly evaluated assisted by online software (http://www.genscript.com/cgi-bin/tools/rare_codon_analysis) and then they were optimized according to the preferred codon usage of E. coli (http://www.jcat.de/). The optimized oleT JE and ohyA EM gene were chemically synthesized by Genray Company using plasmid pGH as the vector (called pGH-oleT JE and pGH-ohyA EM, respectively). The oleT JE gene fragment was obtained by digestion of pGH-oleT JE with BamHI and SacI and was then ligated into the corresponding sites of pCOLADuet-1 to create pYJM30. Using the primers oleT-F (5′-CTAGCTAGCGGCAACACTTAAG AGGGATAAG-3′) and oleT-R (5′-CTAGGAGCTCTTATGTTCTGTCT ACAAC-3′) with plasmid pGH-oleT JE as a template, the oleT JE gene containing NheI and SacI sites was obtained by PCR. The isolated oleT JE gene fragment was digested using NheI and SacI and inserted into the NheI/SacI sites of pBAD18 to yield plasmid pYJM31.

To construct the plasmid YJM32, the ohyA EM gene was amplified by PCR using the primers ohya-F (5′-CGCGGATCCGAACCCGATCACCTCTAAATTCG-3′) and ohya-R (5′-CCCAAGCTTTTAACCACGGATACCTTTAACCCA-3′) with the plasmid pGH-ohyA EM as a template. The isolated ohyA EM gene fragment was excised with BamHI and HindIII and was inserted into the vector pCOLADuet-1 to form pYJM32. The ohyA EM gene fragment was obtained by excision from pGH-ohyA EM with BglII and XhoI and was introduced into pYJM30 to make pYJM33.

The oleT JE -ohyA EM gene was digested from pYJM33 with BamHI and XhoI and ligated into pET-28a(+) to create pYJM34. Using the primers ohya-F1(5′-ACGCGTCGACGAACCCGATCACCTCTAAATTCG-3′) and ohya-R, the ohyA EM-1 fragment was amplified by PCR with plasmid pGH-ohyA EM as a template. The amplified ohyA EM-1 gene was cut by SalI and HindIII and then introduced into the plasmid pYJM31 to create pYJM35.

The plasmids pYJM16 [9] and pBAD18 [29] were constructed as described previously.

Purification of His6-OleTJE and His6-OhyAEM for in vitro enzyme assays

Approximately 0.5 ml of an overnight cultures inoculated into 50 ml of LB medium and cultivated at 37 °C. When the OD600 reached up to 0.9, 0.5 mM isopropyl β-D-thiogalactopyranoside (IPTG) was added into cultures to induce the protein production for 16 h at 28 °C. The cells were pelleted by centrifugation and resuspended in binding buffer (20 mM sodium phosphate, 0.5 M NaCl, pH 7.4). The cell membranes were destroyed using a sonic oscillator (Sonics VCX130). The lysate was centrifuged (12,000 g, 30 min), and the resulting supernatant was purified with a Ni-NTA purification system (Invitrogen) in which the protein concentration was determined using the Bradford Protein Assay Kit (Tiangen, China). The purification was appraised by SDS-PAGE.

Enzymatic assay for 3-methyl-3-buten-1-ol production

The enzyme assay was performed as previously described [30]. 12 mM MgCl2, 5% glycerol, 50 mM Tris–HCl (pH 8.0), 250 mM ATP, 2 mM dithiothreitol (DTT), and 100 μM MVA were mixed and added into a gas chromatography vial containing 0.5 μM purified His6-OleTJE enzyme. Enzyme-free or MVA-free control reactions were performed in parallel. Due to the volatility of 3-methyl-3-buten-1-ol, the headspace of the assay mixtures was sampled and characterized by GC-MS.

GC-MS analysis of 3-methyl-3-buten-1-ol

The production of 3-methyl-3-buten-1-ol generated from the genetic strains was characterized by GC-MS analysis. The system was composed of a model 7890A network GC system (Agilent Technologies) and a model 5975C network mass selective detector (Agilent Technologies, Santa Clara, CA) in which A HP-INNOWAX capillary column (30 m × 0.25 mm × 0.25 μm, Agilent, Palo Alto, CA, USA) was adopted with helium as the carrier gas. The following temperature program was applied: 30 °C for 5 min, an increase of 7 °C/min to 100 °C, then rising from 100 °C to 250 °C at 25 °C/min. The injector temperature was set at 250 °C. A 1 μl sample was injected using a split injection mode with a split ratio of 20:1.

Enzymatic assay for isoprene production

Purified His6-OhyAEM was added to 20 mM Tris–HCl (pH 8.0) buffer containing 5 mM MgCl2, 50 mM NaCl, and 3-methyl-3-buten-1-ol with various amounts. Enzyme-free or substrate-free (3-methyl-3-buten-1-ol) control reactions were performed in parallel. The 1 ml reactions were placed in 2 ml gas-tight gas chromatography vials and was incubated at 37 °C for 72 h, and the headspace of the assay mixtures was sampled and measured by GC-MS.

GC-MS analysis of isoprene

Putative isoprene products were detected by GC-MS. The GC-MS system was the same with the above described. The following temperature program was used: the initial temperature was maintained at 40 °C for 1 min, then increased to 70 °C at the constant flow rate of 4 °C/min, followed by an increase from 70 °C to 250 °C at the rate of 25 °C/min. The temperature of injector was set at 250 °C. A 1 μl sample was injected in the split injection mode with a split ratio of 7:1.

Shake-flask cultures

Shake-flask experiments were carried out in triplicate in 600 ml sealed shake flasks consisted of 50 ml of fermentation medium as designed above. E. coli strains were inoculated into the medium and cultivated at 37 °C and 170 rpm. When the OD600 amounted to 0.6-0.9, 0.5 mM IPTG was added to the cultures and further cultivated at 30 °C for 24 h. Thereafter, a 1 ml headspace gas sample of the sealed cultures was extracted for test as was previously described [31]. Different concentrations of isoprene produced by the strains were calculated by means of converting the GC peak area to μg or mg of isoprene via a calibration curve. The standard curve was made as the follows: An isoprene standard (TCI-EP, Tokyo, Japan) of various concentrations was added in 600 ml sealed shake flasks consisted of 50 ml of fermentation medium. Due to the isoprene’s volatility, the headspace gas sample was extracted and detected using GC, the standard curve was made by various concentrations and their corresponding peak areas. Optimization of the fermentation medium as well as the process was given in Additional file 1.

Fed-batch fermentation

The fed-batch fermentation of isoprene was conducted in a 5 L fermentor. The strain was grown in 2.5 L fermentation medium under the conditions of the fermentation temperature being maintained at 31 °C and the pH at 7.0 using NH3 · H2O. The flow rate of air was maintained at 1.3 VVM. 0.25 mM IPTG addition induced the cells at an OD600 of ~12 and the inducer was added every 8 h. During the whole course of fermentation, a glucose analyzer (SBA-40D, China) was adopted to measure the residual glucose which was kept below 0.5 g/L with glucose solution addition. In the meantime, the off-gas samples were taken from the fermentor and analyzed every 15 min by GC as described [31], and the growth of the bacterial culture was determined by measuring the OD600 with a spectrophotometer (Cary 50 UV–vis, Varian).

Abbreviations

DMAPP:

dimethylallyl pyrophosphate

IPP:

isopentenyl pyrophosphate

MVA:

mevalonate

MEP:

methylerythritol 4-phosphate

IPTG:

isopropyl β-D-thiogalactoside

PCR:

polymerase chain reaction

References

  1. Stephanopoulos G. Challenges in engineering microbes for biofuels production. Science. 2007;315:801–4.

    Article  CAS  Google Scholar 

  2. Clomburg JM, Gonzalez R. Biofuel production in Escherichia coli: the role of metabolic engineering and synthetic biology. Appl Microbiol Biotechnol. 2010;86:419–34.

    Article  CAS  Google Scholar 

  3. Alianell GA, Derwitsch F, Wells D, Taylor T: Isoprene compositions and methods of use. In Book Isoprene compositions and methods of use (Editor ed.^eds.). City: Google Patents; 2009

  4. Lindberg P, Park S, Melis A. Engineering a platform for photosynthetic isoprene production in cyanobacteria, using Synechocystis as the model organism. Metab Eng. 2010;12:70–9.

    Article  CAS  Google Scholar 

  5. Steinbüchel A. Production of rubber-like polymers by microorganisms. Curr Opin Microbiol. 2003;6:261–70.

    Article  Google Scholar 

  6. Zhao Y, Yang J, Qin B, Li Y, Sun Y, Su S, et al. Biosynthesis of isoprene in Escherichia coli via methylerythritol phosphate (MEP) pathway. Appl Microbiol Biotechnol. 2011;90:1915–22.

    Article  CAS  Google Scholar 

  7. Zurbriggen A, Kirst H, Melis A. Isoprene production via the mevalonic acid pathway in Escherichia coli (bacteria). BioEnergy Research. 2012;5:814–28.

    Article  CAS  Google Scholar 

  8. Yang J, Zhao G, Sun Y, Zheng Y, Jiang X, Liu W, et al. Bio-isoprene production using exogenous MVA pathway and isoprene synthase in Escherichia coli. Bioresour Technol. 2012;104:642–7.

    Article  CAS  Google Scholar 

  9. Yang J, Xian M, Su S, Zhao G, Nie Q, Jiang X, et al. Enhancing production of bio-isoprene using hybrid MVA pathway and isoprene synthase in E. coli. PLoS One. 2012;7:e33509.

    Article  CAS  Google Scholar 

  10. Lv X, Xu H, Yu H. Significantly enhanced production of isoprene by ordered coexpression of genes dxs, dxr, and idi in Escherichia coli. Appl Microbiol Biotechnol. 2013;1–9.

  11. Martin VJ, Pitera DJ, Withers ST, Newman JD, Keasling JD. Engineering a mevalonate pathway in Escherichia coli for production of terpenoids. Nat Biotechnol. 2003;21:796–802.

    Article  CAS  Google Scholar 

  12. Pitera DJ, Paddon CJ, Newman JD, Keasling JD. Balancing a heterologous mevalonate pathway for improved isoprenoid production in Escherichia coli. Metab Eng. 2007;9:193–207.

    Article  CAS  Google Scholar 

  13. Chen H-T, Lin M-S, Hou S-Y. Multiple-copy-gene integration on chromosome of Escherichia coli for beta-galactosidase production. Korean J Chemical Engineering. 2008;25:1082–7.

    Article  CAS  Google Scholar 

  14. Kuhlman TE, Cox EC. Site-specific chromosomal integration of large synthetic constructs. Nucleic Acids Res. 2010;38, e92.

    Article  Google Scholar 

  15. Atsumi S, Liao JC. Directed evolution of Methanococcus jannaschii citramalate synthase for biosynthesis of 1-propanol and 1-butanol by Escherichia coli. Appl Environ Microbiol. 2008;74:7802–8.

    Article  CAS  Google Scholar 

  16. Atsumi S, Hanai T, Liao JC. Non-fermentative pathways for synthesis of branched-chain higher alcohols as biofuels. Nature. 2008;451:86–9.

    Article  CAS  Google Scholar 

  17. Rude MA, Baron TS, Brubaker S, Alibhai M, Del Cardayre SB, Schirmer A. Terminal olefin (1-alkene) biosynthesis by a novel p450 fatty acid decarboxylase from Jeotgalicoccus species. Appl Environ Microbiol. 2011;77:1718–27.

    Article  CAS  Google Scholar 

  18. Kuzuyama T. Mevalonate and nonmevalonate pathways for the biosynthesis of isoprene units. Biosci Biotechnol Biochem. 2002;66:1619–27.

    Article  CAS  Google Scholar 

  19. Zheng Y, Liu Q, Li L, Qin W, Yang J, Zhang H, et al. Metabolic engineering of Escherichia coli for high-specificity production of isoprenol and prenol as next generation of biofuels. Biotechnology for biofuels. 2013;6:1–13.

    Article  Google Scholar 

  20. Wallen L, Benedict R, Jackson R. The microbiological production of 10-hydroxystearic acid from oleic acid. Arch Biochem Biophys. 1962;99:249–53.

    Article  CAS  Google Scholar 

  21. Niehaus Jr WG, Schroepfer Jr G. The reversible hydration of oleic acid to 10D-hydroxystearic acid. Biochem Biophys Res Commun. 1965;21:271–5.

    Article  CAS  Google Scholar 

  22. Bevers LE, Pinkse MW, Verhaert PD, Hagen WR. Oleate hydratase catalyzes the hydration of a nonactivated carbon-carbon bond. J Bacteriol. 2009;191:5010–2.

    Article  CAS  Google Scholar 

  23. Marliere P: Method for producing an alkene comprising the step of converting an alcohol by an enzymatic dehydration step. In Book Method for producing an alkene comprising the step of converting an alcohol by an enzymatic dehydration step (Editor ed.^eds.). City: EP Patent 2,336,340; 2011.

  24. Bentley FK, Zurbriggen A, Melis A. Heterologous expression of the mevalonic acid pathway in cyanobacteria enhances endogenous carbon partitioning to isoprene. Mol Plant. 2014;7:71–86.

    Article  CAS  Google Scholar 

  25. Wei J, Zhou Y, Xu T, Lu B. Rational design of catechol-2, 3-dioxygenase for improving the enzyme characteristics. Appl Biochem Biotechnol. 2010;162:116–26.

    Article  CAS  Google Scholar 

  26. Syrén P-O, Lindgren E, Hoeffken HW, Branneby C, Maurer S, Hauer B, et al. Increased activity of enzymatic transacylation of acrylates through rational design of lipases. J Mol Catal B: Enzym. 2010;65:3–10.

    Article  Google Scholar 

  27. George KW, Thompson MG, Kang A, Baidoo E, Wang G, Chan LJG, Adams PD, Petzold CJ, Keasling JD, Lee TS: Metabolic engineering for the high-yield production of isoprenoid-based C5 alcohols in E. coli. Sci. Rep. 2015;5:11128. DOI: 10.1038/srep11128.

  28. Zhang F, Carothers JM, Keasling JD. Design of a dynamic sensor-regulator system for production of chemicals and fuels derived from fatty acids. Nat Biotechnol. 2012;30:354–9.

    Article  CAS  Google Scholar 

  29. Guzman L-M, Belin D, Carson MJ, Beckwith J. Tight regulation, modulation, and high-level expression by vectors containing the arabinose PBAD promoter. J Bacteriol. 1995;177:4121–30.

    CAS  Google Scholar 

  30. Rude MABT, Brubaker S, Alibhai M, Cardayre SBD, et al. Terminal Olefin (1-Alkene) Biosynthesis by a Novel P450 Fatty Acid Decarboxylase from Jeotgalicoccus Species. Appl Environ Microbiol. 2011;77:1718–27.

    Article  CAS  Google Scholar 

  31. Julsing MK, Rijpkema M, Woerdenbag HJ, Quax WJ, Kayser O. Functional analysis of genes involved in the biosynthesis of isoprene in Bacillus subtilis. Appl Microbiol Biotechnol. 2007;75:1377–84.

    Article  CAS  Google Scholar 

Download references

Acknowledgments

This work was financially supported by the National High Technology Research and Development Program of China (863 Program, No. 2013AA050703-2), the Taishan Scholars Climbing Program of Shandong (No. tspd20150210), the high-level talents fund project of Qingdao Agricultural University (No. 6631113326), the Natural Science Foundation of Shandong Province, China (No. ZR2015BM021), the National Natural Science Foundation of China (No. 21572242), the Recruitment Program of High-end Foreign Experts of the State Administration of Foreign Experts Affairs (No. GDW20153500203) and the project of Science and Technology for People’s livelihood of Qingdao (No. 15-9-2-94-nsh).

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Mo Xian or Huizhou Liu.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

MX and HZL developed the idea for the study. JY designed the research, did the literature review and prepared the manuscript. MX and QN helped to revise the manuscript. JY did the lab work, plasmid construction, strain cultivation. HL did Fed-Batch Fermentation and product detection. All authors read and approved the final manuscript.

Additional file

Additional file 1:

Optimization of Fermentation Process and three Figs. (DOCX 216 kb)

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yang, J., Nie, Q., Liu, H. et al. A novel MVA-mediated pathway for isoprene production in engineered E. coli . BMC Biotechnol 16, 5 (2016). https://0-doi-org.brum.beds.ac.uk/10.1186/s12896-016-0236-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s12896-016-0236-2

Keywords