 Methodology article
 Open access
 Published:
A statistical assessment of differences and equivalences between genetically modified and reference plant varieties
BMC Biotechnology volumeÂ 11, ArticleÂ number:Â 15 (2011)
Abstract
Background
Safety assessment of genetically modified organisms is currently often performed by comparative evaluation. However, natural variation of plant characteristics between commercial varieties is usually not considered explicitly in the statistical computations underlying the assessment.
Results
Statistical methods are described for the assessment of the difference between a genetically modified (GM) plant variety and a conventional nonGM counterpart, and for the assessment of the equivalence between the GM variety and a group of reference plant varieties which have a history of safe use. It is proposed to present the results of both difference and equivalence testing for all relevant plant characteristics simultaneously in one or a few graphs, as an aid for further interpretation in safety assessment. A procedure is suggested to derive equivalence limits from the observed results for the reference plant varieties using a specific implementation of the linear mixed model. Three different equivalence tests are defined to classify any result in one of four equivalence classes. The performance of the proposed methods is investigated by a simulation study, and the methods are illustrated on compositional data from a field study on maize grain.
Conclusions
A clear distinction of practical relevance is shown between difference and equivalence testing. The proposed tests are shown to have appropriate performance characteristics by simulation, and the proposed simultaneous graphical representation of results was found to be helpful for the interpretation of results from a practical field trial data set.
Background
Biotechnology has developed to allow the production of genetically modified organisms carrying specific characteristics of interest. For example, plants can be made tolerant to a herbicide, thus facilitating traditional chemical weed control, or can be induced to produce an insecticidal protein, thus reducing the need for external chemical treatment. Because of its novelty, concerns exist regarding the safety of genetic modifications (e.g. [1]).
In Europe, genetically modified organisms (GMOs) and derived products are allowed on the market after passing an approval system in which the safety for humans, animals and the environment is assessed. This safety assessment is performed by the GMO Panel of the European Food Safety Authority (EFSA), that has issued guidance for applicants who seek to bring GMOs onto the European market [2]. These guidelines advocate a risk assessment strategy known as the comparative approach [3, 4]. Comparative risk assessment is based on the idea that typically there are organisms that are very similar to the GMO, which have a history of safe use as foods. Such organisms can be used as comparators for the GMO, and the purpose of the comparative analysis is to identify similarities and differences between the GM cropderived food/feed and its nonGM counterparts. In the first step agronomic and morphological characteristics of plants are considered as well as their chemical composition. The general idea is that a comparative risk assessment can establish equivalence between the GMO and its nonGM counterpart for characteristics other than the intended effects of the genetic modification. Equivalence in this context is defined as the absence of differences other than those due to natural biological variation. However, little guidance is available how to perform equivalence testing for GMOs in practice. Although the EFSA Guidance Document [2] discusses general principles for risk assessment and recommends the use of appropriate statistical tools, detailed protocols for the design of experiments and statistical analysis are not provided.
In practice, applicants have been using widely differing protocols to carry out field trials and very different models for the statistical analysis (e.g. [5â€“10]). Oberdoerfer et al. [5] applied equivalence tests using fixed but arbitrary equivalence limits of Â± 20%. In a later paper by Hothorn and Oberdoerfer [6] this fixed value was described as rigid and not reflecting the difference in variability between components, and componentspecific safety ranges were proposed to be proportional to the variance of the concurrent control in the same field trials, which method ignores the amount of background variation found between commercial varieties. Hammond et al. [7] and Park et al. [8] only applied difference tests, which ignores the question which difference would be relevant biologically. Special pleading for significant results was needed in the first of these publications to arrive at their conclusion that the GMO was as safe and nutritious as reference varieties. McNaughton et al. [9] and Herman et al. [10] adjusted p values of difference tests using the False Discovery Rate method which is a method developed for multiple difference tests. However, this method is simply not appropriate in the context of equivalence testing because it is only concerned with false discoveries and not with false nondiscoveries. In any case, whatever the advantages and disadvantages of the methods, the application of different statistical approaches and models may lead to different conclusions regarding the risk assessment of GMOs and derived foods/feeds. Therefore a working group of the EFSA GMO Panel investigated whether more detailed guidance could be provided to applicants regarding the use of appropriate statistical models for the analysis of the data from field trials for compositional, agronomic and phenotypic studies and animal feeding trials, and regarding the design of field trials. This paper is based on the report of the working group [11], and is restricted to the statistical analysis of data on the chemical composition of plants obtained in field trials. We will not further discuss the experimental design of such field trials (see [11]). Whereas typically many plant characteristics are analysed in such field trials, the scope of the statistical tests in this paper is restricted to the analysis of single characteristics. However, a simultaneous display of test results for multiple plant characteristics is advocated.
Equivalence testing is commonly used in biomedical and pharmaceutical statistics [12, 13]. For example, pharmacokinetic parameters of alternative drug formulations have to be shown to be within a factor 1.25 of the value for the reference drug. In words, the null hypothesis of the equivalence test is (for the symmetric case) "there is a difference between the GMO and its reference of a certain minimum size" against the alternative hypothesis: "there is no or only a small difference between the GMO and its reference". In this testing procedure we need a significant result (rejection of the null hypothesis) in order to conclude that the GMO and the reference are equivalent. Thus there is a limited Error I probability (Î±) that equivalence is concluded whereas a difference larger than the limit value exists in reality.
Specific questions exist for equivalence testing of GMOs. First, how can equivalence limits for GMO mean characteristics relative to reference mean characteristics be defined given that no generally agreed equivalence factor (such as 1.25) exists? Secondly, how should equivalence limits be estimated given that appropriate data from field trials will describe typical biological variation rather than the maximum allowable variation? Thirdly, can the equivalence testing procedure be adapted to the typical large biological variation usually found in field studies?
Equivalence testing requires the determination of equivalence limits to enable its implementation. For each chosen characteristic, or for groups of them, equivalence limits for the true difference are effectively the limiting values for an acceptable difference. In this paper we will determine equivalence limits as relative deviations from the overall mean of the reference varieties. In current practice, equivalence limits have almost never been established satisfactorily before the experiment. Therefore, we suggest that commercial reference varieties are included in field experiments, to allow a direct comparison with the GMO. As will be explained, this can be seen as a test of the difference between GMO and the population of commercial references. An alternative view is that the reference varieties in the experiment allow the estimation of equivalence limits, which are subsequently used for assessing the equivalence of the GMO. Inclusion of both the conventional counterpart and reference varieties in field or animal experiments for GMO safety testing is not new, and papers on such experiments have been published (e.g. [14â€“16]). However, as far as we know data from such studies have not been used before for setting limits for equivalence testing in the manner proposed here.
Results
Equivalence testing for GMOs
We developed a statistical methodology to assist in the comparative risk assessment of GM crops. The novelty of the method is the simultaneous assessment of both differences and similarities (equivalences). To detect unintended effects, it is optimal to study the differences of the GMO with its nonGM counterpart. However, to assess similarities and equivalence, a characterization of natural biological variability is needed. We propose that the GMO can be viewed relative to the background variation shown by common varieties (e.g. commercial varieties) used as references. For this dual purpose of difference and equivalence testing we propose the use of field trials using not only the GM crop and its nonGM counterpart, but also a range of reference varieties. Designs using a wide range of varieties have been used previously, showing that this is a feasible approach in principle (e.g. [14â€“17]).
When testing for differences (proof of difference approach) the null hypothesis and alternative hypothesis are:
where Î”_{GC} is the true difference on an appropriate scale between the GMO and the conventional counterpart. Student's ttest is a common tool for simple comparisons, but for the statistical analysis of data from more complicated designs linear mixed models are appropriate, as are also used in this paper (see Methods section). For testing statistical significance of differences an alternative procedure is to construct a confidence interval for the difference, and observe whether this includes the value zero. This method is preferred because it gives the bonus of a quantification of the estimated difference and its uncertainty.
A statistically significant test result identifies a difference, whether it is biologically relevant or not. Moreover, whereas for tests with confidence level 1Î± there is a limited Error I probability (Î±) that a significant result is obtained (i.e. a difference is found) whereas no difference exists in reality, these tests do not restrict the Error II probability (Î²) of finding no significance whereas in reality there is a difference. So the absence of a significant difference is not a proof for equivalence of the GMO and the counterpart, or ''absence of evidence is not evidence of absence'' [18, 19]. This motivates supplementing the difference test with an equivalence test.
For equivalence testing the state of nonequivalence needs to be put as a null hypothesis, thus assigning the restricted Error I probability Î± of the test to the event of falsely declaring equivalence (rejecting the null hypothesis of nonequivalence). This requires the use of equivalence limits as maximum acceptable deviations because the simple inequality Î”â‰ 0 does not qualify as a testable hypothesis. Thus, when testing for equivalence of a GMO and a reference the null and alternative hypotheses become:
where Î” _{ GR } is the true difference between the GMO and the reference, and where EL is the equivalence limit for this difference. Note that the hypotheses above assume symmetrical lower and upper equivalence limits (EL_{ L } = EL and EL_{ U } = EL), but this can be easily generalised if needed. Using this set of hypotheses it can be seen that the observed difference between GMO and reference mean should be small to reject the null hypothesis (and therefore accept the alternative statement of equivalence). Large differences will not lead to significant test results (and therefore the statement of nonequivalence cannot be rejected in those cases).
With prior specified equivalence limits, both the difference test and the set of equivalence tests can be implemented using a single confidence interval. This is in the spirit of the two onesided tests (TOST) approach of Schuirmann [20]. Both implied null hypotheses of nonequivalence (H_{0}: Î” _{ GR } â‰¤ EL and H_{0}: Î” _{ GR } â‰¥ EL) are rejected if the confidence interval lies entirely between the equivalence limits. In equivalence studies the choice of a 90% confidence interval is customary [12, 13] as it corresponds with the customary 95% level for statistical testing of equivalence. However, it should be stressed that preference for specific levels of confidence is not a statistical decision, but one to be made by risk managers. For simplicity of the approach we nevertheless propose to calculate by default twosided 90% confidence intervals rather than calculating confidence intervals separately with different confidence levels for the difference and the equivalence tests. This proposal implies that each (twosided) difference test will have a 90% confidence level, and each equivalence test a 95% confidence level.
The statistical procedure needed for GMO equivalence testing is however more complicated than this. A single test would be sufficient with fixed equivalence limits, using e.g. a generally agreed equivalence factor (such as 1.25). Lacking this we estimate equivalence limits from field studies with concurrent reference varieties, which are typically the same studies in which also the GMO and its nonGM counterpart are tested. We therefore have a twostep procedure, at least in principle. The first step is the setting of equivalence limits (step L), the second step is their use for assessing equivalence (step E).
As practical limits on background variation we consider appropriate percentiles (e.g. 2.5 and 97.5) of the distribution of reference variety characteristics as the true equivalence limits. Being based on limited data, the estimated equivalence limits in step L are always uncertain. In principle, equivalence limits could be calculated in one of the following three ways: 1) as point estimates of the true equivalence limits; 2) as 'inner' confidence limits (by setting them as the lower confidence limit on the upper equivalence limit and the upper confidence limit on the lower equivalence limit); or 3) as 'outer' confidence limits (the upper confidence limit on the upper equivalence limit and the lower confidence limit on the lower equivalence limit). In this paper the third option is chosen, because typical variation between reference varieties is smaller than maximum allowable variation, which would ideally underlie the setting of equivalence limits. Consequently equivalence limits based on the typical variation between reference varieties in the field trial are not true safety limits but only specifications of limits on natural background variation. Therefore their uncertainty can be allowed to be included in the width of the equivalence interval as in the chosen third option. The EFSA GMO Panel considered that specifying minimum requirements for the experimental design [11] was enough to limit the inevitable estimation errors to reasonable levels.
The second step of the equivalence testing procedure (step E) consists of comparing the GMO mean to the equivalence limits obtained in step L. Again there are three options for testing: (E1) direct comparison of the point estimate for the GMO to the equivalence limits; (E2) a true test of equivalence (test the null hypothesis that the GMO mean is outside the equivalence limits against the alternative that it is inside them); and (E3) a true test of nonequivalence (test the null hypothesis that the GMO mean is inside the equivalence limits against the alternative that it is outside them). Borrowing some terminology from quality inspection theory (e.g. [21]), test E2 controls the 'consumer's risk' because it has a limited probability of accepting nonequivalent varieties, and test E3 controls the 'producer's risk' because it has a limited probability of rejecting acceptable varieties. Test E1 will find 'equivalence' more often than test E2 but less often than test E3, for which reason we will refer to test E1 as a 'shared risk' test. 'Shared' here means that a borderline variety has a 50% probability to be classified as either equivalent or nonequivalent using this test procedure (as is confirmed by simulation, see Table 1). We propose to classify the results of test E1 as 'equivalence more likely than not' or 'nonequivalence more likely than not'.
In traditional equivalence testing [12, 13] E2type tests are being used. However, these may have a low power in case of a large residual variation, which is typical for agricultural field studies. Therefore, addressing our third question (how to counter the problem of high variability), it is proposed here not only to rely on test E2, but to apply all three tests. This provides a richer view on equivalence than obtained by using only one test. Therefore the final outcome of the equivalence assessment is not just binary, but it is one of four equivalence categories, for which we propose the following labels: (i) equivalence; (ii) equivalence more likely than not; (iii) nonequivalence more likely than not; and (iv) nonequivalence.
The outcome of test E2 discriminates category (i) from (ii)+(iii)+(iv). Similarly, the outcome of test E3 discriminates category (iv) from (i)+(ii)+(iii). The outcome of test E1 discriminates (i)+(ii) from (iii)+(iv). In the Method section exact calculations will be defined, and it will be shown that the proposed test E1 applied to estimated equivalence limits is actually just a test of difference, with the null hypothesis that GMO and reference means are equal, but allowing for variability between genotypes (which is the crucial difference with the traditional difference test). On the other hand, tests E2 and E3 are truly twostep procedures, where the null hypothesis value of the test is only established after step L. Consequently, statistical properties of such tests can only be defined conditionally on the outcome of step L.
For the interpretation of results we recommend a graphical display, similar to those suggested by others [22, 23]. However, certain adjustments are needed to account for the fact that equivalence limits are estimated values, and these are described in detail in the Methods section. Figure 1 presents a schematic simplified example of the display, showing the possible outcomes for a single characteristic. For any given characteristic there are then fundamentally seven possible types of outcome. Among these seven types there are four where the mean value of the GMO lies between the adjusted equivalence limits (types 14), and three where it lies outside the equivalence limits (types 57). It is assumed here that the line of no difference is in between the adjusted equivalence limits. If not, then the selected conventional counterpart is itself nonequivalent to the reference varieties and a separate, nonstatistical discussion should consider the place and relative importance of difference and equivalence testing in the risk assessment.
The results of the four tests are easily derived from the graphical presentation as in Figure 1. The test of difference will give a significant result if the confidence interval bar does not cross the line labelled "no difference". Therefore in outcome types 2, 4, 6 and 7 there is a significant difference between the GMO and the counterpart. The test of equivalence consists of three subtests as explained before. First, when the point estimate of the GMO vs. counterpart difference falls within the adjusted equivalence limits then the conclusion is that the GMO variety is not significantly different from the reference varieties and equivalence is more likely than not (outcome types 14). Second, a stronger conclusion can be given and the null hypothesis of nonequivalence will be rejected (in favour of the alternative hypothesis of equivalence) when the confidence interval bar falls entirely within the adjusted equivalence limit lines (outcome types 1 and 2). Finally, when the confidence interval bar lies completely outside the adjusted equivalence limits (outcome type 7), the null hypothesis of equivalence can be rejected and the reasonable conclusion is that of nonequivalence.
The interpretation of the outcome types 36 with respect to GMO risk assessment may be more difficult than for types 1, 2 and 7, and may need further safety evaluation, possibly using alternative statistical methods. For example, if differences, even if not statistically significant, were consistent over multiple situations, this could indicate the occurrence of unintended effects. Outcome types 1 or 2 may easily be obtained for characteristics that are stable and precisely measured within each genotype, but that have a large natural variation among reference genotypes. Outcome types 3 or 5 may easily result when the measurement precision or withingenotype stability is low in comparison to the natural variation.
We propose to display as many of the analysed characteristics as is feasible simultaneously, on the same graph (see the Results  Field trial example section). More than one graph is required if characteristics are analysed on different scales, and/or if some are transformed and others not.
Testing the method by simulation
The performance of difference and equivalence tests was investigated using simulation. The simulation settings were based on the real field trial data (see Methods section for details).
In the first simulation study (reported in Table 1, upper part) the GMO mean was a random draw from the same distribution as the reference varieties, thus mimicking a stochastic equivalence between GMO and reference varieties. When the counterpart mean was chosen equal to the GMO mean, the theoretical size of the difference test (0.1) was reproduced. When the counterpart mean was a random draw from the reference distribution or was set equal to the reference mean, there were almost always true differences between GMO and counterpart, and these were detected with a power around 80%. The performance of the equivalence tests was independent of the choice of the counterpart mean. Equivalence was detected with 95% probability using test E1 and with 7677% probability using test E2. Nonequivalence was detected with less than 1% probability in test E3.
In the second simulation study (reported in Table 1, lower part) the GMO was chosen at the border between equivalence and nonequivalence, M_{R}+LSD(GR;2;95) (see Methods section for details). The border value 0.2407 on ln scale corresponds to a relative difference between GMO mean and reference mean of 100*[exp(0.2407)1] = 27.2%. As in the first study the theoretical size of the difference test (0.1) was reproduced when the counterpart mean was chosen equal to the GMO mean, and again, the results for the equivalence tests did not depend on the choice of the counterpart mean. Under this nullhypothesis both the proof of equivalence test (E2) and the proof of nonequivalence test (E3) were rejected in about 5% of the simulations, which is the theoretical size of the tests. The shared risk test (E1) accepted equivalence in 50% of the simulations, as expected.
The results of the third simulation series are shown in Figure 2. Here the GMO mean was varied systematically, deviating between dif = 0% and dif = 65% from the reference mean, and the counterpart mean was set equal to the reference mean. For the case dif = 0% the size of the difference test (0.10) is reproduced, in all other cases there are true differences, and it can be seen that the power of test D quickly rises to effectively 100% at dif = 10%. Figure 2 also shows the behaviour of the three equivalence tests. The proof of equivalence and proof of nonequivalence tests (tests E2 and E3, respectively) are seen to have the nominal size (0.05) at the equivalence/nonequivalence borderline value dif = 27.2%. The equivalence test based on testing the difference between GMO and reference varieties, resulting in a statement whether (non) equivalence is more likely than not (test E1) was not designed as a real proof of equivalence test. As expected, test E1 has a probability of 50% to conclude equivalence for dif = 27.2%. In comparison to test E2 it has higher power to find true equivalence, but of course pays for this by also having a larger probability to state 'equivalence more likely than not' when in fact there is nonequivalence. Finally, it can be noted that between 5% and 25% the GMO is still often found to be equivalent to the reference varieties, although it is very likely that at the same time a significant difference with the conventional counterpart is found.
Field trial example
The proposed methods are illustrated by an example using real data provided by EFSA. Since this paper is not intended to contribute to the risk assessment of specific cases, the data are presented anonymously (see Methods section for details). The precise calculations are described in the Methods section. A graphical overview of the results of the comparative analysis is shown in Figures 3 and 4. More detailed results are given in Figure 5, and in Tables 2 and 3.
Figures 3 and 4 show the relative differences of the GMO with respect to the conventional counterpart for 53 plant characteristics. For example, relative large deviations are seen for acid detergent fiber (+10%), ferulic acid (13%), folic acid (+14%), neutral detergent fiber (+14%), niacin (13%) and total dietary fiber (+12%). However, depending on the variability and uncertainty underlying them, large differences may not be statistically significant (e.g. the interval for acid detergent fiber includes 1, so the difference is not significant), while smaller differences may be (e.g. glycin is significantly higher in the GMO than in the counterpart, with a point estimate of only +3.5%). Note that the significance tests are based on a standard error of difference (see Table 3) which is calculated from the residual variance V_{Îµ} (see Table 2) as se{d}_{GC;1}=\sqrt{{V}_{\mathrm{\xce\mu}}\left({\scriptscriptstyle \frac{1}{12}}+{\scriptscriptstyle \frac{1}{10}}\right)}, where 12 and 10 are the number of replications in this experiment for GMO and counterpart, respectively. The number of degrees of freedom, estimated by the KenwardRoger method, varies between 38.7 (16:1 palmitoleic) and 54.6 (ash).
In total there were twentythree analytes with a significant difference between GMO and counterpart (which is 43% of the 53 investigated analytes). These analytes are shown in blue (or in black or red if there was also a potential equivalence problem) in Figures 3 and 4, and some examples of boxplot representations [24] of these data are shown in Figure 5 to assist further interpretation. Note, however, that these boxplot representations ignore some aspects of the model, such as site and replication variation. Therefore, the boxplots alone cannot provide a complete overview.
The variation between reference varieties has been used to calculate equivalence limits. Although conceptually there is just one set of equivalence limits, the limits were calculated on three different scales. Each scale is useful for a specific purpose.
1. The first scale is the natural scale which allows food/feed experts to recognize values most easily. For instance, niacin has an equivalence interval [16.1, 27.1] when back transformed on this natural scale. These intervals are shown in the boxplots (Figure 5).
2. The second scale is the ratio scale where the GMO is compared to the mean of the reference varieties (see Table 3). This scale provides the most direct view whether the difference between GMO and references is significant (it is significant if the interval does not contain the value 1). This scale is therefore best for distinguishing between equivalence categories (ii) and (iii) (test E1). For niacin the equivalence interval on this scale is [0.59, 0.99], so indeed the difference is significant and nonequivalence is more likely than not.
3. Finally, the equivalence interval can be expressed on the adjusted scale where both GMO and references are compared to the conventional counterpart (see Figures 3 and 4); this scale allows a simultaneous presentation of the results for both the comparison of GMO with the counterpart and the comparison of GMO with the reference lines. Therefore it is the easiest scale for performing a test of equivalence by the graphical equivalent of the TOST procedure advocated in this paper (see Figures 3 and 4). For the example of niacin the equivalence interval on this adjusted scale is [0.88, 1.20]. This interval overlaps with the confidence interval for the comparison of the GMO with its counterpart (which is [0.84, 0.90], see Table 3), therefore neither equivalence nor nonequivalence has been proven for this analyte (tests E2 and E3).
In any case, the three intervals are just adjusted versions of each other and completely equivalent for statistical testing as explained more fully in the Method section. In the current example two cases were found where, on applying test E1 the GMO point estimate falls outside the calculated equivalence limits, or, in other words, there was a statistically significant difference between the GMO and the references (16:0 palmitic and niacin). For these analytes nonequivalence is more likely than not. For further interpretation boxplots are given in Figure 5. It can be seen that for 16:0 palmitic both the GMO and the counterpart are higher than the reference range, therefore on this single characteristic GMO and counterpart seem to present the same hazards, if any. It is outside the scope of this document to discuss the risk assessment of such cases. For niacin the situation is different. Niacin is found 24% lower in the GMO than on average in the reference varieties, and the result is also significantly lower (by 13%) than what is found for the counterpart.
A problem occurs when the variance component between reference genotypes is estimated as zero. In the current example dataset this occurred with ash and phytic acid. In these cases the calculation of standard errors of difference will be based on the assumption that there is no variation between the reference genotypes, and standard errors and degrees of freedom are derived from a model which omits the random factor for genotypes. This is not a truly believable model: too many degrees of freedom will be assigned to the standard error of difference (see Table 3) leading to equivalence intervals which are typically too narrow.
Accepting the calculated equivalence limits as null hypothesis values in a test of equivalence for the remaining 49 analytes leads to the conclusion that 44 are proven to be equivalent to the reference varieties, whereas for 5 (lysine, phosphorus, potassium, vitamin B6 and vitamin E) the equivalence is more likely than not, but not strictly proven at the 95% confidence level. For further interpretation boxplots can be given, see examples in Figure 5.
Discussion
Difference testing and equivalence testing can both contribute to a meaningful comparative assessment. First, the GMO can be different from its appropriate nonGM counterpart, and a difference may constitute a hazard (or potential risk) which should be subject to further safety evaluation. This is why the proof of difference is sometimes referred to as "proof of hazard", but this is a misleading term because there are many differences that present no hazard for human health. Secondly, a GMO can be equivalent to appropriate references, such as a range of commercial varieties. Established equivalence of a GMO has been interpreted as relevant for subsequent toxicological risk assessments. It should be stressed that statistical approaches should never be used for automatic decisions of food safety, but as tools providing the appropriate context for the final safety assessement.
For testing of differences and equivalences twosided tests (both increased and decreased characteristics are relevant) is the most common case, but if it is a priori known that differences can only be in one direction, then it can be easily adapted to onesided versions (looking only at increases or decreases).
Not always will there be datasets from field trials with reference varieties in their trial design. Use of literature data may occasionally be considered as an alternative source for quantifying background variation, but may present great difficulties both regarding the representativity of the data and the possibilities to discern the different components of variation. Further discussion is given in [11].
We described how the simultaneous application of difference and equivalence testing can lead to seven possible types of outcome (see Figure 1). With respect to the necessity of further evaluation to assess a possible impact of GMOs on human/animal health, the patterns of significant differences (Types 2, 4, 6, 7) should be inspected for biologically relevant signals. Cases with a clearly established nonequivalence in test E3 (Type 7) and cases where nonequivalence is found more likely than not in test E1 (Types 5, 6) require further evaluation. Risk assessors may also require further evaluation for cases where equivalence is more likely than not according to test E1, but not significant in the formal equivalence test E2 (Types 3, 4). Risk characterization will then be used by assessors to specify what further evaluation is needed, based on considerations linked to patterns of observed results and biological or toxicological relevance.
Experiments should be designed to have sufficient statistical power to be able to reject the null hypotheses being tested for relevant magnitudes of effect. However, the use of observed power, which is power estimated from the data arising from the experiment itself, is not a valid alternative. It has been proposed that equivalence can be concluded for a nonsignificant difference, provided that the observed power of the difference test for a difference at the equivalence limit is at a specified high level. However, Tempelman [25] pointed out how with those criteria a poorly executed experiment would be rewarded a greater chance of concluding equivalence than an experiment with a better precision. Power analysis must therefore be done prior to the experiment.
It can be noted that for difference and equivalence testing approaches power analysis has a different purpose. First, risk assessors should require that a difference test will find true differences of a specified magnitude in a substantial probability of cases (e.g. 80%). Secondly, applicants for introducing a GMO on the market have an interest that a truly equivalent GMO will pass the equivalence test with high probability. This requires a power analysis where the relevant effect level is for example a zero or small difference between the GMO and the mean of the reference varieties.
In this paper the focus is on comparing characteristics averaged over environments. In the biomedical literature on equivalence testing this is known as an approach for average (bio)equivalence. Alternative approaches are based on the idea of individual (bio)equivalence related to the question of switchability of the treatments [12]. In the context of field trials this can be translated to requiring equivalence in the population of environments (sites). In the linear mixed model approach the genotype by environment interaction would have to be estimated [26], which is typically easy to do (see Methods section for details). However, the consequences for safety assessment are still unclear, for example would it be possible to declare a GMO equivalent in some environments and not in others? More discussion on such issues is needed before a statistical approach can be devised.
Commercial reference varieties have also been included in animal feeding studies (e.g. [8, 12, 27, 28]). In principle our proposed method can be used there as well. However, when it is expected that the investigated characteristics (such as animal blood and urine parameters) do not vary at all between reference varieties used in the feed, this would not conform to the basic idea proposed here of using observed variation between genotypes as a basis to determine equivalence limits. Further research on such cases is needed.
The method proposed in this paper may contribute to an objective and transparent process of risk assessment. However, several issues remain to be solved. First, the approach should be adapted for data which cannot readily be transformed to normality, such as counts, quantal or ordinal data. Second, research is needed for the power analysis of mixed model tests. More research is needed to characterize the coverage probability of the estimated confidence intervals for small sample sizes, such as three plots, two years, and four sites, because the available models are asymptotic. Moreover, research is needed for an optimal design, i.e. optimal numbers of plots and sites for a most powerful decision on equivalence. Statistical analysis may need to be adapted to more complicated designs (e.g. repeated measures). And last but not least, these methods may be adapted to the simultaneous assessment for multiple characteristics. When performing many simultaneous tests spurious significant results can be expected both in proof of difference and proof of equivalence. There is little experience with multivariate tests of equivalence (see e.g. [29â€“31]). Multivariate analysis may give an alternative approach to the multiplicity issue. Although some discussion of these issues is given in [11], more research is needed.
Conclusions
Safety assessment of GMOs is ultimately a complex undertaking in which the interpretation of compositional data is only one element. And even in this restricted setting the role of statistical methodology is limited to provide a context for the final biological interpretation of results. Nevertheless, this interpretation can benefit from a standardised statistical approach that clearly shows differences and equivalences in a comparable manner.
The main purposes of the comparative assessment are twofold: to demonstrate whether the GMO and/or derived food/feed is different from its appropriate nonGM counterpart and/or to demonstrate whether it is equivalent to appropriate reference varieties, apart from the intended changes. This paper proposes a statistical methodology that is not focussed exclusively on either differences or equivalences, but that provides a richer framework within which the conclusions of both types of assessment are allowed simultaneously. The approaches are complementary: statistically significant differences may point at biological changes caused by the genetic modification, but which are not relevant from the viewpoint of food safety. On the other hand, equivalence assessments are used to classify differences as being inside or outside the range of natural variation. A procedure combining both approaches will aid the subsequent interpretation of the statistical results.
A simulation study using realistic variance values validated the expected probabilities of the tests proposed. An important conclusion is in a typical situation of variabilities a range of deviations exists, say between 5% and 25%, where the GMO is still equivalent to the reference varieties, although it is very likely to find a significant difference with the conventional counterpart. This illustrates that the application of equivalence testing is a useful complement to the traditional practice of performing difference tests.
The conclusions drawn for the example field trial dataset can be summarised as follows. For 23 out of 53 analytes there were statistically significant differences (at the 90% confidence level) between GMO and counterpart. The differences varied between 13% and +14%. For two analytes, 16:0 palmitic and niacin, a statistically significant deviation (at the 95% confidence level) from the mean of the reference varieties was found, and nonequivalence was more likely than not. Further evaluation is required. For five analytes, lysine, phosphorus, potassium, vitamin B6 and vitamin E, equivalence was more likely than not, but a strict proof of equivalence cannot be given. Further evaluation may be required. For two analytes, ash and phytic acid, no proper conclusion on equivalence can be formulated because of lack of observable natural variation in the reference varieties. Further evaluation may be required. For 44 analytes (including 20 with significant differences between GMO and counterpart) equivalence was established in a formal test of equivalence (at the 95% confidence level) using the estimated equivalence limits.
Methods
Linear mixed models
Measurements can be made on several scales (continuous, ordinal, quantal, binary, count, multinomial). Here, we focus on the continuous scale, which is appropriate for most compositional, agronomic and phenotypic variables in field studies. For measurements made on other scales it is often possible to devise similar statistical approaches to those described here.
It is often appropriate to transform data before standard statistical methods are used. For example, many biological effects are better described as multiplicative rather than additive effects. Differences are commonly expressed as a percent change, i.e. as relative differences (ratios) rather than absolute differences. On the other hand, most statistical models are additive models for estimating or testing absolute differences. A logarithmic transformation of the data may be appropriate because it transforms a multiplicative model into an additive model, and thus relative differences into absolute differences through the equation log(A/B) = log(A) log(B). Only when reporting results (graphs, tables) can these be backtransformed to the original scale. Here, we use logarithmic transformations, but the appropriateness of this should be investigated on a casebycase basis for other data.
Field experiments are usually replicated at multiple sites. At each site a field trial is conducted with the varieties randomised over plots in multiple blocks (or replications). The statistical analysis of data from the experiments for comparative risk assessment is here restricted to studying the average difference and the average equivalence over sites. The primary objective for an average difference/equivalence approach is neither the identification of possible interactions nor persite (peryear) evaluation. Instead, overall (for all sites, plots, years) confidence limits are estimated, allowing statements on overall differences and equivalences.
A linear mixed model is used for the statistical analysis of the data set (all sites and/or years) where the factors site and, if present, year are assumed to be either random or fixed, depending on the details of the experimental design. In this paper we assume random site effects. The betweensite, betweenreplicate, betweenplot and possibly the betweenyear variability will be estimated as related variance components.
For the purpose of modelling the differences and similarities from an experimental design with GMO, counterpart and a range of reference varieties, it is useful to describe the genotypes of the measured samples not just by one factor, but by two factors and a dummy variable:

1.
GenotypeGroup: a 3level fixed factor distinguishing GMO, conventional counterpart and the group of reference varieties as a whole; note that this factor includes the specific contrasts of interest between GMO and its counterpart, and between GMO and the group of references;

2.
Genotype: a random factor with as many levels as there are varieties (GMO, conventional counterpart and each of the reference varieties);

3.
IndRef: an indicator variable with value 1 for the reference varieties, and 0 otherwise.
By including the interaction of Genotype and the (uncentered) indicator variable IndRef in a mixed model, the GMO and its counterpart are not considered as levels of the random factor. Therefore in such a model the difference between the GMO and its counterpart and the difference between the GMO and the mean of the reference varieties, which are both specific contrasts of the fixed factor GenotypeGroup, will be assessed against the proper residual variation, excluding the variance between genotypes. If on the other hand the indicator variable is omitted the residual variation will include the variance between reference genotypes which is appropriate for establishing equivalence limits from the full range of reference varieties. Note that in neither of these models do the GMO and counterpart means contribute to the residual variance component because of the presence of the fixed factor GenotypeGroup. In the case of the example field trial data the ln transformed data were thus analysed with two slightly different versions of the mixed model, hereafter named model 1 and model 2, respectively. For the tests of difference and equivalence:
and for establishing equivalence limits:
where i, j, k and l are indices for site, block within site, treatment group (counterpart, GMO or reference) and reference varieties, respectively. The response y_{ ijkl } is the logtransformed result, using the natural logarithm (ln). The fixed factors in this model are Mean, the overall mean, and GenotypeGroup_{ k } , the average deviation from the overall mean for each of the three treatment groups (k = 1: counterpart, 2: GMO, 3: reference genotypes). The random factors in the model are Site_{ i } , the average deviation for site i, Block_{ ij } , the average deviation for block j of site i, Genotype_{ l } , the average deviation for reference genotype l, and Îµ_{ ijkl } , the residual term for each measurement. As usual in mixed modelling, the random terms are assumed to arise independently from normal distributions with mean 0 and a certain variance component that is to be estimated (V_{ s } , V_{ b }, V_{ g } and V_{ Îµ } , respectively). A common way to fit mixed models to data is the residual maximum likelihood (REML) algorithm, which is available in all major statistical packages.
If it would be needed in addition to the average difference/equivalence approach of this paper, the site by genotype interaction can be investigated by defining another indicator variable, with value 0 for the reference varieties, and 1 otherwise, and including its interaction with GenotypeGroup as an additional fixed effect (uncentered) in the model. We do not further pursue this model here (see Discussion section).
For comparing all tested varieties we need estimated means, m_{ C },m_{ G }and m_{ R }(for counterpart, GMO and references, respectively) and the standard errors of difference, sed_{ GC;i }and sed_{ GR;i }, where i is the model adopted.
Where as these estimates are easily available in mixed models from standard software, they can also be written out explicitly for both model 1 and model 2, at least when the datasets are balanced (GMO, counterpart and n_{ g } reference genotypes in n_{ r }replicates on n_{ s }sites):
Approximate twosided 100(1Î±)% confidence intervals are based on the seds and t_{ df } _{;}_{ p } , being the p = 100(1Î±/2)% point of the appropriate Student's t distribution, where df is the appropriate number of degrees of freedom. For the calculation of df the method of Kenward and Roger [32] has been recommended [33]. The product t_{ df } _{;1}Î±_{/2} sed is called the least significant difference (lsd) and may be obtained directly in some statistical packages. For the comparison between test materials X and Y using model m (1 or 2) and onesided confidence percentage p we will denote this by lsd(XY;m;p).
The appropriate calculations to perform the difference and equivalence tests are as follows:

1.
For the test of difference (test D) calculate 90% confidence limits as m_{ G } Â± lsd(GC;1;95); when the counterpart mean m_{ C } falls outside this confidence interval the difference between GMO and counterpart is statistically significant.

2.
For the equivalence tests, calculate equivalence limits EL_{ L } and EL_{ U } as 95% confidence limits around the reference mean m_{ R } : m_{ R } Â± lsd(GC;2;97.5).

3.
When the GMO mean m_{ G } falls outside the equivalence interval [EL_{ L } , EL_{ U } ], the difference between the GMO and the reference variety group is statistically significant allowing for the background variation between genotypes, and nonequivalence is more likely than not ('shared risk' test of equivalence E1).

4.
For the tests of equivalence E2 ('proof of equivalence') and E3 ('proof of nonequivalence') calculate 90% confidence limits as m_{ G } Â± lsd(GC;1;95). Equivalence is proved using test E2 if this confidence interval falls entirely within the equivalence interval [EL_{ L } , EL _{ U }]. Nonequivalence is proved using test E3 if the confidence interval falls entirely outside the equivalence interval [EL _{ L }, EL _{ U }].
All tests are performed on the logarithmic scale. For interpretation of the numerical values, the means and differences of means on the logarithmic scale can be backtransformed to geometric means and ratios of geometric means on the original scale. So, based on a difference D, the point estimate of the corresponding ratio is e^{D} , and the approximate 100(1Î±)% confidence interval is e^{Dlsd} , e^{D+lsd} .
The practical implementation in two major software packages for assessing the difference of the GMO to the counterpart using model 1 (test D) is as follows (assuming levels 1, 2 and 3 of the genotypegroup factor corresponding to counterpart, GMO and references, respectively):
Genstat:
FACTOR [labels=!T(compGMO,ref)] ref_aside
CALC ref_aside = 1*(genotypegroup.in.!(1,2))+\
2*(genotypegroup == 3)
VCOMPONENTS\
[fixed = ref_aside/genotypegroup; cadjust = none]\
random = site + site.rep + genotype.indref;\
constraint = pos
REML y
SAS:
proc mixed data = example CL = WALD alpha = 0.1;
class site rep genotype genotypegroup;
model y = genotypegroup/s
covb outp = out ddfm = kenwardroger;
random site site*rep indref*genotype;
estimate 'gmo_comp' genotypegroup 1 1 0/CL;
run;
The practical implementation for estimating the equivalence limits and for performing equivalence test E1 using model 2 is as follows:
Genstat:
FACTOR [labels=!T(comp,GMOref)] comp_aside
CALC comp_aside = 1*(genotypegroup == 1)+\
2*(genotypegroup.in.!(2,3))
VCOMPONENTS\
[fixed = comp_aside/genotypegroup]\
random = site + site.rep + genotype;\
constraint = pos
REML y
SAS:
proc mixed data = example CL = WALD alpha = 0.05;
class site rep genotype genotypegroup;
model y = genotypegroup/s
covb outp = out ddfm = kenwardroger;
random site site*rep genotype;
estimate 'gmo_ref' genotypegroup 0 1 1/CL;
run;
For equivalence testing according to tests E2 and E3, again using model 1, the code is as follows:
Genstat:
FACTOR [labels=!T(comp,GMOref)] comp_aside
CALC comp_aside = 1*(genotypegroup == 1)+\
2*(genotypegroup.in.!(2,3))
VCOMPONENTS\
[fixed = comp_aside/genotypegroup; cadjust = none]\
random = site + site.rep + genotype.indref;\
constraint = pos
REML y
SAS:
proc mixed data = example CL = WALD alpha = 0.1;
class site rep genotype genotypegroup;
model y = genotypegroup/s
covb outp = out ddfm = kenwardroger;
random site site*rep indref*genotype;
estimate 'gmo_ref' genotypegroup 0 1 1/CL;
run;
These program fragments give only the essential central mixed model calculation. Obviously more programming is needed for reading the data, outlier control, data transformation, and postprocessing the results to calculate confidence intervals, equivalence limits and plotting the graphs.
The basic information needed from the mixed model are the means, the standard errors of difference and the corresponding degrees of freedom. With the above two specifications of the mixed model (either with Genotype or with Genotype. IndRef among the random terms) the means and variance components are exactly the same. Only the seds and the dfs are different. Actually, from equations (3) it follows that the seds from the two models 1 and 2 are related by:
where V_{ g }is the variance component estimate for the background variation between the reference varieties. Note that we need the sed_{ GC; } _{1} (so excluding genotypic variation) for the GMO to counterpart difference test D, and the sed_{GR;2 }(including genotypic variation) for estimating the equivalence limits and test E1. For equivalence tests E2 and E3 we need both. Because of the relations fitting either one of the models would be enough to allow the calculation of both seds. The only remaining reason for fitting two models rather than one to the same dataset is the different calculation of the degrees of freedom by the KenwardRoger method in the two cases.
Presentation of results
After the appropriate transformation, simultaneous display is facilitated by shifting all relevant values for each particular characteristic to a scale that has m_{C}, the mean of the conventional counterpart for that characteristic, as its baseline zero value. Therefore, on this new scale, the values of the means of the GMO, its conventional counterpart and the set of reference varieties, become, respectively: m_{G}  m_{C}, 0, m_{R}  m_{C}. Note that a difference of 0 on an additive scale corresponds to a ratio of 1 on a multiplicative scale. Hence, in principle, for a multiplicative scale, both the mean of the GMO and the equivalence limits can be displayed as ratios to the counterpart (but see below for certain adjustments required to achieve a valid practical outcome).
After shifting all relevant values to the new zero baseline, the confidence limits for the difference test on this new scale become: m_{G}  m_{C} Â± lsd(GC;1;95), the equivalence limits m_{R}  m_{C} Â± lsd(GR;2;97.5), and the confidence limits for the equivalence tests E2 and E3 m_{G}  m_{C} Â± lsd(GR;1;95). Note that the equivalence limits, chosen to be symmetrical around the centre of the distribution of reference varieties, are typically asymmetrical (before and after adjustment) on this new scale. To facilitate visual interpretation, instead of using the two sets of confidence limits in the graphs, it is recommended for convenience that only one be displayed, that for the difference test. Without some adjustment, the confidence limits for the difference test would not give a valid visual representation for the equivalence test on the graph. This problem is overcome by making an adjustment to the displayed equivalence limits. After this adjustment the displayed confidence limits for the difference test may be used as a basis also for the visual representation of the equivalence test. In this way, one confidence limit may serve visually for assessing the outcome of both tests simultaneously. The adjustment of the equivalence limits consists of two steps: (1) scaling the basic equivalence limits, so that the confidence limits required for the difference and equivalence tests have the same width; and (2) an appropriate shift to facilitate display of the adjusted limits, together with m_{G}, on the scale that has m_{ C } as its baseline zero value. The adjusted equivalence limits for visual display are calculated by the formula:
Note that this adjustment is being made just for the ease of visual display, and that the adjusted confidence limits have exactly the same inclusion probability of 95% for the true difference as the unadjusted confidence interval.
It is recommended that the graph should show the line of zero difference between the GMO and its conventional counterpart and, for each characteristic: the lower and upper adjusted equivalence limits, the mean difference between the GMO and its conventional counterpart, and the confidence limits for this difference (see the set of possible example outcomes for a single characteristic in Figure 1). The horizontal axis is labelled with values that specify the change on the natural scale. In the case of a multiplicative scale and a logarithmic transformation, changes of 2 Ã— and 1/2 Ã— will appear equally spaced on either side of the line of zero difference
Simulations
Simulation studies were performed to investigate how well the difference and equivalence tests perform. Observations were generated for 8 sites, 4 blocks per site and 8 genotypes (GMO, counterpart and 6 reference varieties, representing commercial varieties in the real world) according to a linear model for logarithmicallytransformed observations. The model contained random terms for site, block, genotype and plot (residual) drawn from normal distributions with mean 0 and variances equal to 0.0029, 0.0008, 0.0127 and 0.0073, respectively, which were the average variance components found for 53 analytes in the field trial example (see hereafter). For the 6 reference genotypes independent random deviates were drawn from the genotype distribution with mean 0 and variance 0.0127.
In a first series of simulations the GMO mean was considered exchangeable to the reference genotypes, and therefore its value was set by making a draw from the same normal distribution, with mean 0 and variance 0.0127. Three options for setting the counterpart mean were investigated: a) equivalent to the reference mean (its value was set by making another draw from this same normal distribution); b) equal to the reference mean (its value was set to 0); or c) its value was set identically equal to the GMO mean.
In a second series of simulation the GMO mean was set equal to the theoretical upper equivalence limit calculated as described below. Again the same three options for the counterpart mean were investigated.
In a third series of simulations the counterpart mean was set to be equal to the reference mean (identically equal to 0), and the GMO mean was varied systematically to investigate the power of the tests. Its value was set equal to a value d (where d was varied systematically between 0 and 0.5 (or, equivalently, the relative difference on the original scale dif = 100*[exp(d)1] was varied between 0% and 65%). Note that the choice d = 0 corresponds to exact equality of GMO and counterpart, whereas other choices lead to a true difference, though not necessarily nonequivalence, because this depends on what values the equivalence limits are set to.
Field trial data
The dataset analysed in this paper is an example of a comparative assessment regarding GMO safety using real data from a field study. We consider here 68 compositional characteristics of maize grain. Each characteristic was measured on (i) a GM variety, (ii) a conventional counterpart variety, and (iii) 13 reference varieties. The data come from a randomised block design conducted at four sites in one year. Under the protocol of the experimental design each site was to have been planted with the GM variety, the counterpart variety and four reference varieties in three blocks of six plots, but there were some deviations. The GM variety was replicated three times at each site, and the conventional counterpart variety three times at two of the sites, but only twice at the other two sites. Each of three reference varieties was planted at two sites, but each of the remaining 10 reference varieties at one site only. Most varieties had 3 replicates per site (but in some cases only 2 or even 1). The data analysed here have 1418 plots per site, for a total of 67 plots. It may be noted that this experimental design is not ideal. For example, the number of sites and the replication per site were relatively low, and the conventional counterpart was not included in all blocks. However, in spite of the shortcomings of the experimental design the data were found suitable for illustrating the statistical analysis.
For 15 of the 68 analytes considered (namely 13 fatty acids, furfural and sodium) all results (or, in one case, all but one) were below a given limit value. Without further knowledge about the nature of this limit value we simply refer to it as the limit of reporting. As there was no variation in these results which could be used for a comparative evaluation, they were omitted from the further statistical analysis. Seven results in the remaining set of 53 analytes were reported as less than a given limit value (nondetects): six results for 16:1 palmitoleic acid and one result for phytic acid. The problem seemed minor, and, although more advanced statistical methods exist to incorporate such results in modelling, here the nondetects were simply set to half the limit of reporting. Outliers were identified by visual inspection of graphs showing the logtransformed results for each of the three groups (GMO, counterpart, reference). Outliers were identified for four analytes (see [11] for details), and also the seven nondetects set to half the limit of reporting were outlying. Outliers were omitted from the further statistical analysis.
A small additional simulation study was performed to investigate whether the observed number of significant differences between GMO and counterpart (23) is large under the null hypothesis that variation between genotypes can be described by a normal distribution with variance V_{ g } on the logarithmic scale. Here we take for V_{ g } the quantifications as obtained with the mixed model (Table 2). Under this null hypothesis and ignoring further estimation error, differences d between any two varieties would have a normal distribution with variance 2V_{ g } . In 1000 iterations random values for d were sampled from this distribution for all analytes, and a twosided t test at the 95% confidence level was performed assuming that the sed_{ GC;1 } and the corresponding degrees of freedom estimate from the actual experiment were appropriate characterisations of residual error. Over the 1000 iterations the average number of significant test results was 36 (approximate 95% confidence interval (30, 42)). Therefore, under a null hypothesis describing equivalence between all the varieties, the observed number of significant differences between GMO and counterpart (23) is relatively small.
Differences between GMO and counterpart may not be constant over sites. This was investigated by fitting additional fixed terms ref_aside.site and ref_aside.genotypegroup.site in mixed model 1, and performing a Wald test to obtain a p value for the significance of the latter term. For 8 analytes the genotype by environment (GxE) interaction was significant (p < 0.05), and geometric means per site (not shown) may then help a further interpretation of the results.
Availability and requirements
Programs implementing the proposed approach in the GenStat and SAS statistical packages for the specific example case data of this paper are available at http://www.efsa.europa.eu/en/scdocs/doc/1250ax2.pdf. More userfriendly and generally applicable software is under development and will be made available on the EFSA website later.
References
Mayer S, Stirling A: Finding a precautionary approach to technological developments  Lessons for the evaluation of GM crops. Journal of Agricultural & Environmental Ethics. 2002, 15: 5771.
EFSA: Guidance document of the Scientific Panel on genetically modified organisms for the risk assessment of genetically modified plants and derived food and feed. 2006, European Food Safety Authority, Parma
Kok EJ, Kuiper HA: Comparative safety assessment for biotech crops. Trends in Biotechnology. 2003, 21: 439444. 10.1016/j.tibtech.2003.08.003.
KÃ¶nig A, Cockburn A, Crevel RWR, Debruyne E, Grafstroem R, Hammerling U, Kimber I, Knudsen I, Kuiper HA, Peijnenburg AACM, Penninks AH, Poulsen M, Schauzu M, Wal JM: Assessment of the safety of foods derived from genetically modified (GM) crops. Food Chem Toxicol. 2004, 42: 10471088.
Oberdoerfer RB, Shillito RD, de Beuckeleer M, Mitten DH: Rice (Oryza sativa L.) containing the bar gene is compositionally equivalent to the nontransgenic counterpart. Journal of Agricultural and Food Chemistry. 2005, 53: 14571465. 10.1021/jf0486500.
Hothorn LA, Oberdoerfer R: Statistical analysis used in the nutritional assessment of novel food using the proof of safety. Regulatory Toxicology and Pharmacology. 2006, 44: 125135. 10.1016/j.yrtph.2005.10.001.
Hammond B, Lemen J, Dudek R, Ward D, Jiang C, Nemeth M, Burns J: Results of a 90day safety assurance study with rats fed grain from corn rootwormprotected corn. Food and Chemical Toxicology. 2006, 44: 147160. 10.1016/j.fct.2005.06.008.
Park H, Lee S, Jeong H, Cho S, Chun H, Back O, Kim D, Lillehoj HS: The nutrient composition of the herbicidetolerant green pepper is equivalent to that of the conventional green pepper. Nutrition Research. 2006, 26: 546548. 10.1016/j.nutres.2006.09.001.
McNaughton JL, Roberts M, Rice D, Smith B, Hinds M, Schmidt J, Locke M, Bryant A, Rood T, Layton R, Lamb I, Delaney B: Feeding performance in broiler chickens fed diets containing DAS591227 maize grain compared to diets containing nontransgenic maize grain. Animal Feed Science and Technology. 2007, 132: 227239. 10.1016/j.anifeedsci.2006.03.021.
Herman RA, Storer NP, Phillips AM, Prochaska LM, Windels P: Compositional assessment of event DAS591227 maize using substantial equivalence. Regulatory Toxicology and Pharmacology. 2007, 47: 3747. 10.1016/j.yrtph.2006.08.007.
EFSA: Scientific Opinion on Statistical considerations for the safety evaluation of GMOs. EFSA Journal. 2010, 8: 125059. [http://www.efsa.europa.eu]
FDA: Guidance for Industry  Statistical approaches to establishing bioequivalence. 2001, U.S. Department of Health and Human Services, Food and Drug Administration, Center for Drug Evaluationand Research
EMEA: Note for guidance on the investigation of bioavailability and bioequivalence. 2001, Document CPMP/EWP/QWP/1401/98, European Agency for the Evaluation of Medicinal Products, Committee for Proprietary Medicinal Products, London
Ridley WP, Sidhu RS, Pyla PD, Nemeth MA, Breeze ML, Astwood JD: A comparison of the nutritional profile of roundup ready corn event NK603 to that of conventional corn (Zea mays L.). J Agric Food Chem. 2002, 50: 72357243. 10.1021/jf0205662.
George C, Ridley WP, Obert JC: Composition of grain and forage from corn rootwormprotected corn event MON 863 is equivalent to that of conventional corn (Zea mays L.). J Agric Food Chem. 2004, 52: 41494158. 10.1021/jf035023m.
Reynolds TL, Nemeth MA, Glenn KC, Ridley WP, Astwood JD: Natural variability of metabolites in maize grain: differences due to genetic background. J Agric Food Chem. 2005, 53: 1006110067. 10.1021/jf051635q.
Sha XY, Linscombe SD, Groth DE: Field evaluation of imidazolinonetolerant Clearfield rice (Oryza sativa L.) at nine Louisiana locations. Crop Science. 2007, 47: 11771185. 10.2135/cropsci2006.09.0592.
Altman D, Bland JM: Absence of evidence is not evidence of absence. British Medical Journal. 1995, 311: 485
Altman D, Bland JM: Confidence intervals illuminate absence of evidence. British Medical Journal. 2004, 328: 10161017. 10.1136/bmj.328.7446.1016b.
Schuirmann DJ: A comparison of the two onesided tests procedure and the power approach for assessing the equivalence of average bioavailability. Journal of Pharmacokinetics and Biopharmaceutics. 1987, 15: 657680. 10.1007/BF01068419.
Montgomery DC: Statistical Quality Control, a modern introduction. 2009, Wiley
Jones B, Jarvis P, Lewis JA, Ebbutt AF: Trials to assess equivalence: the importance of rigorous methods. British Medical Journal. 1996, 313: 3639.
Walters SJ: Consultants' forum: should post hoc sample size calculations be done?. Pharmaceutical Statistics. 2009, 8: 163169. 10.1002/pst.334.
Tukey JW: Exploratory data analysis. 1977, AddisonWesley, Reading, Mass
Tempelman RJ: Experimental design and statistical methods for classical and bioequivalence hypothesis testing with an application to dairy nutrition studies. Journal of Animal Science. 2004, 82: E162E172.
Basford KE, Cooper M: Genotype x environment interactions and some considerations of their implications for wheat breeding in Australia. Australian Journal of Agricultural Research. 1998, 49: 153174. 10.1071/A97035.
Taylor ML, Hyun Y, Hartnell GF, Riordan SG, Nemeth MA, Karunanandaa K, George B, Astwood JD: Comparison of broiler performance when fed diets containing grain from YieldGard Rootworm (MON 863), YieldGard Plus (MON 810 Â· MON 863), nontransgenic control, or commercial reference corn hybrids. Poultry Science. 2003, 82: 19481956.
Taylor ML, Hartnell G, Nemeth M, Karunanandaa K, George B: Comparison of broiler performance when fed diets containing corn grain with insectprotected (corn rootworm and European corn borer) and herbicidetolerant (glyphosate) traits, control corn, or commercial reference corn. Poultry Science. 2005, 84: 587593.
Brown LD, Casella G, Hwang JTG: Optimal confidence sets, bioequivalence, and the limaÃ§on of Pascal. Journal of the American Statistical Association. 1995, 90: 880889. 10.2307/2291322.
Munk A, PflÃ¼ger R: 1Î± equivalent confidence rules for convex alternatives are Î±/2level tests  with applications to the multivariate assessment of bioequivalence. Journal of the American Statistical Association. 1999, 94: 13111319. 10.2307/2669944.
Enot DP, Draper J: Statistical measures for validating plant genotype similarity assessments following multivariate analysis of metabolome data. Metabolomics. 2007, 3: 349355. 10.1007/s1130600700662.
Kenward MG, Roger JH: Small sample inference for fixed effects from restricted maximum likelihood. Biometrics. 1997, 53: 983997. 10.2307/2533558.
Spilke J, Piepho HP, Hu X: A simulation study on tests of hypotheses and confidence intervals for fixed effects in mixed models for blocked experiments with missing data. Journal of Agricultural, Biological and Environmental Statistics. 2005, 10: 374389. 10.1198/108571105X58199.
Acknowledgements
Work on this paper was performed in continuation of activities of the EFSA GMO Panel working group Statistics. We would like to thank all members of this working group and the GMO Panel for the stimulating discussions. Data for the example given in this paper were made available by EFSA with the approval of the applicant, for which we are grateful. We also thank all responders in the public consultation of the first draft of the working group report for sharing their insights.
Author information
Authors and Affiliations
Corresponding author
Additional information
Authors' contributions
HV developed the statistical model, performed the statistical analyses and drafted the manuscript. JNP participated in the statistical model development and the description of results. BA participated in the coding of the model in SAS. CP provided the regulatory background and was responsible for describing the position of EFSA. All authors contributed to drafts, and read and approved the final manuscript.
Authorsâ€™ original submitted files for images
Below are the links to the authorsâ€™ original submitted files for images.
Rights and permissions
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
van der Voet, H., Perry, J.N., Amzal, B. et al. A statistical assessment of differences and equivalences between genetically modified and reference plant varieties. BMC Biotechnol 11, 15 (2011). https://0doiorg.brum.beds.ac.uk/10.1186/147267501115
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/147267501115
Comments
View archived comments (1)